What receiver should I buy?
- ...
- 14 posts total
I completely agree with tls49. In fact, I believe the weakest part of a cheaper AVR is the preamp section, not the power amp section. We're not talking about the processing at all. An external power amp attached to an inferior AVR will give you more power, but still poor sound. The Integra mentioned should have absolutely no problem whatsoever driving the Klipsch to crazy high levels with ease. The Klipsch are not a difficult load and their sensitivity is very high. However, a older prepro and power amp can give you flexibility for the down the road where you can replace the prepro and keep the power amp. |
I found this while doing some research. It certainly looks more beastly then what I have now. Does anyone know anything about it? The price looks great. http://emotiva.com/products/amplifiers/xpa-5 |
The problem with cheap AVR’s is that after the processing, the first stage of amplification for the analog signal takes place in its preamp section, If you look at my initial post, I said get the cheapest AVR that has a full set of pre-outs. This automatically implies that your looking at a mid to top of the line unit in just about everyone’s line up because the real cheap ones don’t have pre-outs. This would still be cheaper than a pre-pro - unless there are now some good ones that have come down in price. Back when I was really engaged in HT, a pre-pro was 2-4K and models did not change every year. So I found it more effective to buy an upper level AVR as cheap as possible when they were closed out every Fall. I agree that a superior analog preamp section is where its at for proper musical reproduction. That’s why I am really a 2 channel guy having true stereo components in my system. After a ten year affair with the HT mistress always to be left unsatisfied with music, I went back to stereo and have never been happier. And that was using flagship AVR’s and even HT separates. And it was the pre-amp in every unit that I objected too in addition to the power amp sections in AVR’s. I couldn’t find one that sounded right in either an AVR or a pre-pro. Never found any fault in a good multi-channel power amp though and liked the fact that they never went obsolete. Perhaps the OP should have posted his question in HT sub forum because when he said receiver in the title of his thread, he really meant AVR. |
Your speakers are highly efficient, so you really don't need to be concerned much with power output as almost any decent receiver can easily drive them. I assume you're not streaming music and such, but if you upgrade to a 4k HDTV at some point you might want a preamp or receiver that has more current HDMI processing if you will be using the AVR or pre for video switching and/or processing. If you are not using the AVR/pre for video you can get something like the Anthem MXR710 AVR (which might even be upgradable) and probably live happily ever after. If you use your AVR for video processing/switching and upgradability is a concern and your current AVR has main inputs, the easiest thing may be just to buy a decent prepro and use your HK for amplification and upgrade the prepro if/when necessary. Best of luck. |
- 14 posts total