what is wrong with my Anthem PRE 2L

Turn off the preamp. Wait 30 minutes. Then swap the tubes from the right channel to the left channel and vice versa. If the lower level channel changes to the other channel you will kmow that you have at least one bad tube. If it stays in the same channel then you will know that the tubes are OK, except possibly a little microphonic, and the preamp is the problem. Good Luck, Wally

does the noise change or go away at any different volumes, does the level of the noticable noise increase or decrease with the change of the volume? Are the tubes seated very well on the circuit board?

Well, some of the tubes are microphonic for starters (typical with 6922 type tubes). Try mixing the (eight) that you have until lightly tapping the "outside" of the chassis does not sound through the speakers. It is not good to tap the tubes themselves, but you may have to try this in order to weed out the bad ones (just do it ever so lightly). When swapping tubes, allow them to cool (maybe 30 minutes or so) before moving them (never touch/move a hot tube as this can damage it). Other than microphonics there may be something else wrong with the amp, but this is where I would start. ALSO BE WARNED that there are enough amps stored in this unit (whether it is on/off unplugged or not) to shorten your career, so if you are not familiar with elctronics consider having a friend or shop (someone informed) take a look @ it. If you use only one hand (keep the other behind your back) and touch only the tubes themselves, you should be OK. If both hands accidentaly conduct a current the electricity travels from one hand to the other (through your heart) which is why one hand is safer. Anyone swapping tubes (a common practice for us all) should be using the "one hand" pricipal @ all times.

How old is it? A leaky power supply capacitor can make it noisy. Also, tubes are very microphonic, tapping on the preamp will cause noise through the system just like tapping on a turntable while the system is on. There may also be a way to adjust the balance from left to right internally.