2. analog
  3. 124900-8622

what is the problem with too much tracking force?

I have a Lyra Delos on a Michell Tecnodec.  The dealer set it up for me.  2 years later, I would like to learn to do this myself.  I bought the MOFI Geo Disc alignment tool, a digital stylus scale, a powerful magnifier, and an ultrasonic stylus cleaner.  I am ready to up my game with my vinyl hobby.  I was on the sidelines too long!

The first thing I did was to weigh the VTF with the scale with my table set up as it has been for a couple of years.  It came in at 1.95g.  The Lyra documentation suggests 1.75, so clearly I am tracking too heavy.  Before I correct this, what is the issue?  Is there something I should look for when I change it to 1.75?

Any advice before I do this adjustment would be much appreciated!
marktomaras

Showing 2 responses by lewm

lewm
13,559 posts
 
Nicola, Does this mean that the Allaerts rubber suspension will last another 100 years, or has it reached its expiration date, like a carton of milk?  I presume that Mr. Allaerts believes the former hypothesis.
lewm
13,559 posts
 
Mark Tomaras, The fact that you now read VTF at 1.95g does not necessarily mean that your dealer originally set it at 1.95g; did he confirm that value?  VTF can drift over time for various reasons, so it is wise to check it once in a while.  Why don't you set it to any value within Lyra's recommended range, narrow or not, and listen?  If you hear signs of mistracking, it's never too late to increase VTF.  This is not such a big deal, and there is no one single exact correct VTF.  (Witness the fact that cartridge makers always give you a range of values.) Finally, you say nothing about what gauge you are using to check VTF.  There's good ones and not so good ones; it is crucially important that the stylus tip should be at about the height of the thickness of an LP, when VTF is measured, because VTF will change with height of the stylus tip.  So, if you have a good scale that puts the weigh pan down low at about the height of an LP, and if you made your determination with no LP under the scale, flat down on the mat, then you probably did get a fairly accurate measurement.
More to discover