I originally drove a pair of Acoustat 1100's with a Sumo Andromeda II A power amp... 240 into 8, 400 into 4 and 750 into 2. They are a combination woofer module and a tall electrostatic element. The panels dip as far down as 2 ohms at 10K and over frequencies. I thought that was plenty of power until I decided to bi-amp and use a second matching stereo amp. Woofer modules are fed with one channel of each amp and the panels get a channel of each amp. Bass was tighter and better controlled immediately, transients such as snare drum and all percussion was much better, instantly.
What is Floyd Toole saying about extra amplifier power and headroom?
I've been reading Floyd Toole's "Sound Reproduction The Acoustics and Psychoacoustics of Loudspeakers and Rooms" and came across a passage that I wish he went into further detail about. It has to do with whether having amplifier headroom has any noticeable improvement in sq. He happens to be talking about getting the bass right in small rooms, but in doing so, he also touches on the use of a larger amp for extra headroom:
It's the last part ("useless headroom") that I'm curious about. I have notoriously hard-to-drive speakers (Magico Mini IIs). Although the recommended amplification is 50w - 200w, in my experience, that's a bit of an underestimation. I'm driving the Minis with a Musical Fidelity M6PRX, which is rated at 230w @ 8ohms. (The Minis are 4ohm.) The combination sounds excellent to my ears at low to moderate listening levels, but I notice a slight compression in the soundstage at higher levels. My listening room, while small, is fairly well treated with DIY panels made from Rockwool, sound-absorbent curtains, and thick carpeting. So I don't think I'm overloading the room. But I have wondered if an amp with far more power than what's suggested (more headroom) would drive the speakers with a little less effort.
Those of you familiar with Toole or with driving speakers with power to spare, what are your experiences? If I went with, say, a pair of monoblocks that drive 600w @ 4ohm, would the extra headroom address the compression I'm hearing at higher levels? Or am I wasting my time and, potentially, funds that would be better spent elsewhere?
Thanks!
Remedies for unacceptable situations typically included spending more money on a loudspeaker with a “better” woofer (without useful technical specifications, that was a lottery of another kind) and a bigger amplifier (for useless headroom ...
It's the last part ("useless headroom") that I'm curious about. I have notoriously hard-to-drive speakers (Magico Mini IIs). Although the recommended amplification is 50w - 200w, in my experience, that's a bit of an underestimation. I'm driving the Minis with a Musical Fidelity M6PRX, which is rated at 230w @ 8ohms. (The Minis are 4ohm.) The combination sounds excellent to my ears at low to moderate listening levels, but I notice a slight compression in the soundstage at higher levels. My listening room, while small, is fairly well treated with DIY panels made from Rockwool, sound-absorbent curtains, and thick carpeting. So I don't think I'm overloading the room. But I have wondered if an amp with far more power than what's suggested (more headroom) would drive the speakers with a little less effort.
Those of you familiar with Toole or with driving speakers with power to spare, what are your experiences? If I went with, say, a pair of monoblocks that drive 600w @ 4ohm, would the extra headroom address the compression I'm hearing at higher levels? Or am I wasting my time and, potentially, funds that would be better spent elsewhere?
Thanks!