I'd also contact Kimber about your concerns if you already haven't done so.
Wattgate IEC does not fit tight.
I have a Kimber Palladian power cable which is fantastic. It has Wattgate 330i connecters. The IEC keeps disconnecting from the amp due to not fitting tight. I replaced it with a 350i and it won't even connect now. It seems the part that connects to the amp are too far inside the IEC. It falls out immediately. Is there a quality IEC I can use that fits tight. I used a $6 computer cord and it works fine. any help would be appreciated.
- ...
- 20 posts total
Yeah, congrats, I’ve had this exact problem and it appears by design. I did an in depth analysis here. In addition to the models failing to seat properly, the other issue is the construction materials. I found the assembly screws to be very soft and easy to strip. At beat you could assemble/remove those connectors two or three times before the screw heads stripped. I was really so not impressed by this brand at all. But basically I suggest you give up on Wattgate and get another brand, preferably something without rhodium plating, but the Connex models aren’t bad.
|
- 20 posts total