2. analog
  3. 1200413041

Vinyl Virgin seeks additional advice

My inherited Rega P1 (see http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1200066271&read&3&4& for history) got its new cart, a Ortofon 2M Red, installed by a local audio dealer. The first day of operation was great, good sound, no skipping on new and used LP's. The next day it wouldn't play more than what sounded like a rotation, repeating a two second phrase. I slid the counterweight towards the pivot point and it played through a few cuts before starting to skip again. I have leveled the table and beyond that I don't know what to do. Any ideas of what may be going on? Should the turntable be this finicky?
Thanks for your input.
panamared
2002ss335
84 posts
 
If you were playing the same record both days the first thing that you should have done was to get your best magnifing glass out and just make sure that the stylus is sill intact.
stringreen's avatar
stringreen
6,468 posts
 
I agree with 2002ss335. I don't know why everyone on these discussions are fixated with Anti- Skate. I makes very little difference if any at all.
panamared OP
5 posts
 
Thanks for your input. I'm going to call the dealer who replaced the cart and see if he can take care of it. Any thoughts on why it would play great the first day and then not play after that?
piedpiper
753 posts
 
I good stylus brush may be all you need. It is quite possible from your description that it simply got a significant build up on the stylus. Swampwalker got it backwards. As you obviously guessed you increased the VTF, but possibly way too much. That's where the VTF gage comes in. Also, the set up for that table is very easy. Nonetheless, your dealer may or may not care enough to do a proper job of it. Get a gage and protractor and do it yourself.
headsnappin's avatar
headsnappin
295 posts
 
Hey Stringreen, the anti-skate on VPI 'tables is quite correct the way it is, very few are. On my kit it is easy to discern 1/8g differences in anti-skate, and the differences are important. On my kit, I helped dial in a friends deck and it was mis adjusted at 2.5 with 2g tracking force. I set the anti-skate at 1.5 and the improvement was very large, unanimous by all 3 of us listening.
More to discover