Tube power amplifier low static on one channel


Hi all I have an Audio Note Kit EL34 power amplifier. When the music is off I can hear a static sound from the right channel. It is not constant it gets louder then quieter then nothing then back again. I switched the non power tubes right to left and the static stayed on the original channel.  

If it was a tube it would have switched to the other channel correct?

If it was electro interference it would come out of both channels correct? 

Thoughts on what to check next?

Thanks

jh

johnah5

Ok great idea. I did some research and the sound a bad filter cap makes is a hum. I don't have a hum it is a changing low level static. 

Will do the power tubes and update the post.

jh

It could be two other things - 

- Dirty or loose tube sockets. Inspect, tighten and clean the contacts in the tube sockets

- If you have digital electronics adjacent, such as a router, WiFi modem, satellite, etc, that could be causing the static out of just one channel. Make sure anything of that sort is at least 3-5ft away from tube electronics.

Post removed