TT suggestion in the $7 - 10K range?

Bifwynne Are you now happy with the cartridge you have in your Classic? I have a 10.5i VPI arm, and if set up properly (not hard..just do it properly) I haven't come across too many cartridges that won't work. Some like Shelters need additional weight on the front end, some like the Benz LPS, need additional weight on the back end, some like Clearaudio/Grado can use damping, but I found that there are many cartridges an owner can use with this arm.

Stringreen, all is good. I settled on the Sound Smith VPI Zephyr, which I understand was designed with the VPI Classic in mind -- or so I heard. The DV 20X worked ok too, but the Zephyr is better. I suspect that low compliance/heavy carties work best with the 10.5i arm. My first try was the CA Maestro Wood -- damn think rang in the lower registers. Drove Mike and me crazy, but could not resolve it. Even tried adding a 3 gram head weight and stepped up to the Classic 3 arm wand. I bet another 3 grams might have turned the trick. Anyway, that's all behind me now. Glad to hear that there are choices like the Benz LPS. If I ever get ready to switch out, I'll e mail you for some specific carty suggestions.

I agree with Ebm - ANY of the TW Raven turntables are superb with WORLD CLASS SERVICE!! Of course that presumes that you love MUSIC and not bragging rights and/or the need to constantly "tweak".

This info may be of some value to others, I once had a short discussion with Harry Weisfield earlier in 2011.

The discussion was pertaining to the VPI Classic Turntable, and as Harry stated, the Classis can possibly be ordered, and drilled for a Tonearm other than the JMW Arm.

That for whatever personal reasons, there are possible other candidates for a choice of Tonearm on the Classic.

I know no more than this, and such would of course need to be discussed with the VPI Factory. I would then assume that other similar sized Arms of choice could be implemented. Mark