markd51
Responses from markd51
polishing pins of NOS tubes I wonder how a chemical product would work versus polishing methods? Would something like Tarn-X on the Pins work? Apply with a small brush, wipe off, maybe a final spritz with D5? | |
Outer Vinyl Sleeves, is it a good idea? My entire collection resides in the Japanese Resealable Outer Sleeves that are sold by Elusive Disc. I've never had a problem with mold. These Sleeves are perfectly sized in that they will accept singles, and even all doubles and some triples ... | |
Outstanding Custom Dust Covers I had Digital Deck Covers make covers for my entire main system. Black low gloss vinyl. Virtually all covers have flaps at the back. This eases installation and removal. | |
Teac 3340 Tape Deck general questions I have owned a 3340S since new. Common with these decks was a pair of thin circular black vinyl "shims" that would be placed onto the Reel Tables before installing Reels. I believe they were required with the larger reels so that tape path alignm... | |
Benz Micro Glider Loading I once had the HO version, yeah, the original 2mv, actual rating 1.9mv. This I ran like an MM, at 47.5K. | |
How to prevent visitors from touching your system Buy yourself some Covers. Not affiliated, just a satisfied customer, Digital Deck Covers will make you anything you want. Wouldn't surprise me, that they'd make you some custom fit covers for a pair of JBL 4350's. Out of sight, out of mind. | |
Denafrips FPGA Firmware Update I say this above because I have a Terminator II, and am wringing my hands over being able to be successful with any updates. I'm sure there's a number of unknowns at this point for any-all Denafrips owners. Will there then be update versions lik... | |
Denafrips FPGA Firmware Update It was mentioned earlier that a DSP upgrade could be had for $350, but appears not to be the case with the Terminator II-Plus. | |
JBL 4367 = Sleep Denervation Have you tried the 8 ohm taps? | |
California Audio Labs I recall that Approved Audio will sell some parts outright, if that helps. | |
California Audio Labs Hello, This is the only business I'm aware of that still does repair on CAL. I believe they had bought up all remaining stock of parts. | |
VPI HW-19 with Graham 1.5 arm Question/Suggestions I went from Sorbo Pucks to Herbie's Tall Tenderfeet. I used their extra firm model, a lot of weight with the inner Plinth on my HW-19. They also make a standard model. I felt greater detail came, and better neutrality versus the Sorbo Pucks. Thi... | |
Denafrips Ares ii One question I have for you Denafrips DAC owners, from top to bottom. I have heard it said numerous times about lengthy break in-burn in. Have any of you noticed any such additional need of "waking up", if for say you unplugged this unit for a d... | |
Differences the Project RS2 Transport and the (newest) Jay's Audio CD2 Mk 3 I thought I had read a comment or two pertaining to this. Forgive me if I'm in error. | |
Differences the Project RS2 Transport and the (newest) Jay's Audio CD2 Mk 3 I'm impressed with the Jay's Transports. But may I ask this? Do all their transports have hum? |