Interesting post. But you have not yet done, is confirmed that recording using the USB output is any way less then the set up using the Tasman. Can you do the next logical test and compare the wave file created with the tascam with one recorded directly on the computer using USB input? If they sound equally good, one could solely use the benchmark, which would be more simple and cheaper. Thanks.
Tascam DA-3000 vs Benchmark ADC1 USB
In a previous thread the subject about using a Tascam DA-3000 to archive vinyl was discussed. I had posted that my initial tests with the Tascam were far from satisfying. I speculated that I thought the issue was the analog circuitry in the front end of the Tascam.
Well I just received a Benchmark ADC1 USB and have run a few test recordings to compare with the Tascam.
I set the ADC1 up to feed digital AES/EBU 24bit/96KHz into the AES/EBU digital input on the Tascam. Clock on the Tascam was set to DI (digital input from the ADC1). Clock rate and bit depth were set to match the ADC1.
So I was effectively using the Benchmark for the basic analog to digital conversion, and the Tascam to convert the digital data stream into a WAV file saved to a 4 G SD card in the Tascam. This way I avoided any USB and computer related variables in building the WAV file of the recording.
The analog inputs to the Benchmark ADC1 were straight out (DC out) of the Spectral DMC-10 phono preamp. I used custom built single ended RCA to XLR cables. Surprisingly, I found hum levels were about 6 dB better that the same inputs into the Tascam directly.
I recorded some quick cuts from LPs I am pretty familiar with (Steely Dan Gaucho Babylon Sisters, John Klemmer's Touch, and Blind Faith's Had to Cry Today that I used initially). The recording levels were very easy to set as the Benchmark ADC1 has really nice analog front panel controls for gain. Setting up the Tascam to "Monitor" confirmed the digital levels and both units agreed with each other to within a dB or so.
What about the results?
I was very happy with the recordings made with the Benchmark. When A/B'd directly with the LP, the recorded 24/96K WAV was not identical, but pretty damn close. Much better than recordings made with the Tascam alone. The original LP was a tad bit smoother and very slightly more detailed, but if you were not A/B ing you might not notice the difference. What was important to me was that the recording maintained the space and 3d sound field of the LP, and not crush it into a plane like many CD recordings.
All in all not the cheapest solution, but still cheaper than the Ayre 9A product. Plus using the Tascam gives you a stand alone solution with no need to connect USB to a computer, but it's there if you want it.
I would say Benchmark was pretty true to what they said their product would do.
Well I just received a Benchmark ADC1 USB and have run a few test recordings to compare with the Tascam.
I set the ADC1 up to feed digital AES/EBU 24bit/96KHz into the AES/EBU digital input on the Tascam. Clock on the Tascam was set to DI (digital input from the ADC1). Clock rate and bit depth were set to match the ADC1.
So I was effectively using the Benchmark for the basic analog to digital conversion, and the Tascam to convert the digital data stream into a WAV file saved to a 4 G SD card in the Tascam. This way I avoided any USB and computer related variables in building the WAV file of the recording.
The analog inputs to the Benchmark ADC1 were straight out (DC out) of the Spectral DMC-10 phono preamp. I used custom built single ended RCA to XLR cables. Surprisingly, I found hum levels were about 6 dB better that the same inputs into the Tascam directly.
I recorded some quick cuts from LPs I am pretty familiar with (Steely Dan Gaucho Babylon Sisters, John Klemmer's Touch, and Blind Faith's Had to Cry Today that I used initially). The recording levels were very easy to set as the Benchmark ADC1 has really nice analog front panel controls for gain. Setting up the Tascam to "Monitor" confirmed the digital levels and both units agreed with each other to within a dB or so.
What about the results?
I was very happy with the recordings made with the Benchmark. When A/B'd directly with the LP, the recorded 24/96K WAV was not identical, but pretty damn close. Much better than recordings made with the Tascam alone. The original LP was a tad bit smoother and very slightly more detailed, but if you were not A/B ing you might not notice the difference. What was important to me was that the recording maintained the space and 3d sound field of the LP, and not crush it into a plane like many CD recordings.
All in all not the cheapest solution, but still cheaper than the Ayre 9A product. Plus using the Tascam gives you a stand alone solution with no need to connect USB to a computer, but it's there if you want it.
I would say Benchmark was pretty true to what they said their product would do.