Sweet Spot for Triangle Speakers

The best description for speaker placement that I have read is on the audiophysic web page:
http://www.audiophysic.de/produkte/aufstellung/aufstellung_e2.html
have a read and see if it works for you. I also like the cardas placement method. I have never heard good imaging with speakers close to side or rear walls. I also like nearfield listening.

Seandtaylor99 will definetly check the site out.

I have the Triangle Antals and had a similar problem until I did the following:

1. Since the Antals are used for music and home theater they have a 65" Rear Projection TV between them. I inferred by the fact that you have these hooked up to a home theater receiver that you may have a TV between them. If possible, move them out so the front of the speaker is in front of your TV or cabinet (still on the sides but further out). This will help image focus.

2. Play with toe-in. Toeing them in will focus the image, firing straight ahead will widen the soundstage. I find my Antals sound best fired straight ahead with no toe-in.

3. Try different cables. This made a huge difference. I switched from Kimber 4TC to Mapleshade Golden Helix and it made a huge difference.

4. Use a room tuning device. I use Echobusters behind each speaker. There are also a bunch of DIY recipes (check www.audioasylum.com) for similar

As mentioned I use the Antals for 2 channel as well as home theater. I'm using a Rotel 1066 processor and 985 Amp (5 channel)with MIT interconnects and Mapleshade speaker cables. These brands go very well with Triangle gear (I've tried everything). Good luck.

Patriot, your room dimension is a nightmare - a perfect square is the LAST thing one wants to deal with in setting up speakers. DO check out the Cardas website, and also search the Stereophile site for the Room Tunes articles from a few years ago - I forget who wrote them, but they are there and very good. You more than likely have standing waves all over the place, reinforcing a host of lower pitches, so I would imagine that you will need as another poster pointed out some DIY absorbtion devices. These will be the most imp upgrade you can make barring none, esp given the dimensions of your room.

Mules thank you for your input and Goyescas and Sendtaylor99 thanks again. I appreciate the help and feedback. Have a great weekend.