My Verion - aka Cotter - Type P SUT came with a captive lenght of Verion Tri Axial cable for its outputs. IMO still one of the best SUT’s ever! I paid $375 for mine in 1978! Used with the GAS Sleeping Beauty (Coral 777) mc cartridge. Word to the wise: keep any cable from the SUT output jacks short to avoid capacitive roll-off of highs!
SUT Interconnects
What cables have you tried between an MC SUT box and 47K MM phono stage? What was your favorite?
I’ve tried the AudioQuest upper-line "normal" ineterconnect cables (Sky, Fire) - great cables in other slots - but very colored coming out of a SUT. Not great performance. I assume that at 1.0m+ lengths, their capactitance is far too high for this application. I’ve tried 0.5m runs of Wind & Niagara (a bit lower in their "normal" IC line, slightly smaller guage wire and less shielding to boot) and got better results. However, my best results by far are with a 0.5m AQ WEL Signature LP phono cable (optimized for low capacitance phono applications). I’ve also tried the Bob’s Devices custom cables, 0.7m, both copper and solid silver versions - these have good performance (particularly the silver), but are more on the level of the 0.5m Niagara, still short of the WEL LP.
The problem I have is that the WEL LP is quite spendy, and I want a 2nd good SUT cable for a 2nd arm & SUT setup. Looking for more reasonably priced options. I’ve had excellent results with a Synergistic Research Foundation phono cable on a tonearm (DIN plug), and wonder how a short all-RCA run of it might do off a SUT (also interested in the Atmosphere X series). Any experience with SR or other cables off a SUT would be appreciated!