2. digital
  3. 187413-10297

Streamer to Denafrips Iris to Pontus need cable suggestions please

I’ve got a Iris on the way to mate to a Pontus and have no idea of the type or brand or the quality/price cable I will need. It’s coming from Auralic g2 which has usb, coax, aes,  tos, lan. L-link. 
 

What type and brand/ model do I go from Auralic to Iris. Then what type cable and then brand/ model do I use fro Auralic to Pontus.

 

There will be a HiDiamond RCA’s going from Pontus to Audio Hungary a50i. Audience au24 se and TG Audio speaker cables going to Joseph audio Pulsar and Reference 3a towers. 
 

I know this is a lot to ask but I am not familiar with digital cables. Only digital cable I ever owned is a spdif. I’m using a JPS Labs superconductor true digital coax from streamer to Pontus now. Can I get away without spending a lot of money since some say it’s just digital, probably not, sure hope so. 
 

 

paulcreed

Showing 1 response by fthompson251

fthompson251's avatar
fthompson251
303 posts
 

@jaytor  you can set your gaia to "000" and then try different I2s setting on the Terminator. I had to do this on my Hermes/Venus II and it works again. 

 

>

Please go through the guide detailed here:
https://www.denafrips.com/config-i2s

Suggestion of I²S matching of the Transport & DAC
1. Connect the I²S cable (good quality HDMI cable <3ft/1m)
2. Turn down the volume (audible, minimal)

3. Set Hermes i2s to mode 000.
3. Play a familiar music (PCM first, followed by DSD)
4. Run through the I²S setting of the DAC, 000-111
5. One of the modes should match with the source for both PCM and DSD playback.
000 (1X 2X 4X LED off)
001
011
100
101
110
111 (1X 2X 4X LED on)

More to discover