I got my first Sota, a Sapphire in 1992. I used it for 25 years and maintained it myself periodically lubricating the platter bearing. Interestingly, the type of grease used in the platter bearing affects the sound. I also found the belt needs replacing every couple of years regardless of the amount of use. The other thing is the suspension springs and damping need replacing after a time. I found that when my Sapphire got to be around 12 years old the sub-chassis had some torsional movement that affected the highs mostly. I confirmed this by chocking the sub-chassis to the base. What that means is the sub-chassis was rotating (not visibly) like a pendulum causing a very slight variation, like a warble in platter speed. So the suspension needs some maintenance periodically as well.
Currently using a Nova VI with the Eclipse motor and RoadRunner speed control and the magnetic bearing. This magnetic bearing is the biggest upgrade to the Sota that I have experienced. The turntable is very quiet. The vacuum system is the way to go. It couples the record perfectly to the platter as well as addressing any warp issues. I have one heavy vinyl record with a bit of a warp that requires me to hold the edges down so that the vacuum can grab hold. It grabs all of my other records just fine.
Here's a story: I was with my cousin one summer evening in 1977. We were shopping at a record store and I bought Eric Clapton's Slowhand Album. We stopped at another cousin's place for a visit. They both got wasted so I got to drive my cousin's new Mercury Cougar back to his place. He didn't realize he was sitting on my new record. It warped. Bad. I remember placing it under one of my speakers in college all that winter trying to press the warp out. I had limited success. Well, I can play that record on my Sota and the vacuum system pulls it down flat. Sounds great and I always think of that night when I play it. Now, I'm not saying that vacuum system was made for warped records, but it doesn't hurt.