I have one of the above unit which has experienced a disc reading problem. The unit must be switched on and warm up for more than 30 minutes before it can read any disc (either CD or SACD. Please advise reason or comment if anyone has experienced same kind of problem for this model. I wish that some one will provide the contact of any service or repairing center which can do upgrade and service for this model. Thanks.
That is the problem last I checked when my unit was acting up (about 5years ago) the motor assembly was no longer available nor was it being manufactured. So you are basically SOL if you needed one. Fortunately I was able to fix mine.
Bill Thalmann of music technology is a good source to help fix your Sony SCD-1 if you don't feel comfortable going into the unit yourself. Here is the link http://www.musictechnology.com/
I had a SCD-1 years ago, it started to have read errors. I think I talked to Richard Kern about cleaning the sled assembly. I did my own disassembly, cleaning with a lint free cloth and solvent (brake cleaner) and lubed the assembly with a light Teflon oil I got from Radio Shack called Needle-Tip Precision Lubricator, there are probably other brands out there (Super Lube). As mentioned before in this thread, over time the parts get sticky and cant slide freely. I didn't do anything with the motor and DeOxit but that sounds like a good idea while youre at it. I am not a stereo gear mechanic and I don't remember if I had a manual but got through it without any issues and my player ran fine after the clean and lube.
It really sounds like a sled problem to me too because it is caused by sticky grease that gets loose with warm-up. That might cause sled motor failure too, but these motors are regular DC and still available.
Hope you can fix it as its build quality is stunning.
Try Alpha-Tech Electronics in St. Louis. Possibly one of, if not the best highend audio repiar shop in the country! You can find their info on the web: alphatechstl dot com.
I guess easy is realative but if I can do it I feel it can't be to difficult. You really should have a copy of the service manual first of all so you know what you are getting into.
- You have to remove the transport and remove the slde drive assembly from the transport.
- Use deoxit on the sled drive motor and run the motor in forward and reverse using a nine volt battery.
- While I was in mine I lubed the sled drive and regreasesd the spindle motor.
The above may sound intimadating but it really isn't as long as you keep your head about you and take it slow and methodical.
If you e-mail me I can send you the service manual e-copy if you like.
Once I fixed the sled drive issue (easy fix) I have had no other problems with my scd-1. However, I would be concerned about buying one because of the age and the availability of parts.
I had a 777 and an SCD-1. Both would not read a disc from time to time. I discovered that if I left the units powered up 24/7 that I no longer had the problem.
I would not, not buy a Sony SCD because of these threads. I have a 777, and its killer. Things may break down, but given the amount of units in circulation, its not that bad.
All said and done, there are a lot more working than not.
Thank you for posting this thread. I had considered buying an SCD-1 or an SCD-777 but this thread, and others before it, have convinced me to look elsewhere. I currently have a CDP-R1/DAS-R1 combo without any issues. Despite the "Built like a tank" appearance, the SCD units above seem prone to mechanical issues and are difficult to get repaired.
Sounds like a sled drive motor problem. I have an SCD-1 and had a similar problem and fixed it myself. You need to pick a repair shop who is familiar with this problem and knows how to fix it.
It probably has a bad sled motor. Common problem. I have a 777 that I have not repaired. There is a Sony service center that will fix it. I think it is $279 but you have to ship it.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.