Room design - home theater


Hi all,

I am in the process of building an extension, 14 by 21 feet. I am deciding on the following ceilings..

1) Vaulted Ceiling, 8feet wall to 11feet center of the room
2) 9 feet Flat ceiling
0r
3) Cuffered ceiling with 8 feet on 4 sides and 9 feet center.

Please let me know if you have any inputs on differences between all these 3 ceilings in terms of music and home theater experience.

This room will be 80% music and 20% movies.

Thanks in advance.

Rodney
rodney01
db

Plenty of great ideas there...

it all sounds very nice. I am afraid to cover the screen wall with anything sound absorbent though.

My screen is hinged. It's bottom edge lifts up to expose double louvered bi-folds which open to a storage area in which... at some point... I'll migrate my HT or stereo gear.... once my dedicated ckts get moved.

A clean esthetic goes a long ways to make for a pro looking environment, no doubt.
Thanks for the advice about curtains, Blindjim. I have a 100" screen that I'd like to cover when not viewing.

I built a small stage in front of the screen that my LCR amp sits on, so cabling to and from it can be hidden under the stage. For flexibility, small U-shaped channels that can be painted to match walls/baseboards do a nice job of hiding cables, and allow easy access when a change is needed. Cleaning up clutter in a HT/listening room greatly adds to its enjoyment IMO.

I've never seen the term cuffered ceiling, always coffered. I used a coffered ceiling with faux cross beams. The beams hide PVC that carries cables. Ceiling mounted spots controlled by a dimmer provide illumination yet don't wash the screen. The wall around the screen is covered in charcoal colored carpet as is the stage; the ceiling in front of the screen is covered in heavy black velvet.

db
PVC is an extremely easy material to work with if you want greater choices in wiring used 'in wall' for either power delivery or signal delivery.

otherwise power lines ought to be shielded at least.

I've noticed folks like JPS and others sell upscale electrical and signal wire expressly for use with 'in wall' situations.

There are 'socks' too out there for covering spkr wires and ICs, if needs be which will more closely match up with the flooring colors and decor.

There are also base board stand offs for racing wires behind it.

Another choice for racing wires across the surface of a wall or ceiling is the use of raceways. They can be painted to match the color of the surface they are affixed to and very easy to install…. If things come down to that.

Lending creedance to the above post on overall room size, IF that's cast in stone now, simply adding free standing shelving on the rear wall might help there and add storage for software too, as well as doing triple duty for sound difusion. Too late for me there... my shelving - storage units are built into the rear wall and covered by drapes. Drapes also cover the same span on the opposite end of the room behind the main speakers.

you can hide a lot behind curtains! Stuff you wouldn't necessarily want exposed like sound panels, bass trap panels, a big screen, shelves, etc., and it's a nice look too.

They also difuse the sound if there is sufficient material to develop pleats and of course, the material's own degree of transparency... plus IMHO it makes the room far more natural and home like than recording studio looking.

On a ten foot wide length think at least double and better yet, triple that, for the drapery panels needed to cover it properly. Pleated and hooked are best suited for access behind them, but simple threaded or tabbed panels can do the job very well.
if you're building from scratch here, you might as well do it the right way. If music, you'll do well with the coffered 9' ceiling. I would also NOT do exactly 14' x 21'. You will get much much better sonics if you add 6%-7% difference between multiple dimmensions. (i.e, add 6% to either the 14' dimmension, or 6% to the 21', but not both).
Also, a HUGE benefit of your coffered ceiling is that you can put a massive bass absorber in the ceiling/attic above! In a room of that size - if it's a issolated, sealed in space- you can be assured that you will need to do something with all that excess bass energy. Building a bass trap in the attic space above -accessed from within the inner spaces of the coffering (spaces covered with acoustic transparent fabric- transparent to space above) is an ideal way to balance out the RT time in the room, and make for a supper fast, dynamic, solid bass response from the system. The norm is a slow, fat, overly warm bass sound from sytems, with too much bass overhang covering the sound - especially in smaller acoustic spaces such as this. (yes, 21'x14' is still a small acoustic space).
Regardless, keep the hard dimmensions of the room at multiples that are at least 5%,6%,7% different than each other dimmension, to keep bass modes from piling up and compounding in the room. Results will be a better foundation.
There is of course tons more to the acoustics of your space, building techniques, etc. But I hope this coveres the issues you mentioned.
You may want to order and read a copy of the book Premium Home Theater, design and construction. This book is written by Earl Geddes and is available on his website gedlee.com. it is not cheap about $45 I believe but it has a lot of useful info that will be helpful to you.
Hi guys, thanks for all the responses..

With music is the main focus, we are not going to have a projector. After back-and-forth with the architect, cuffered or tray ceiling will be the choice. with 8 feet at the wall and 9 feet center (this design makes my wife happy). With the ceiling done, now we need to work on drywall (special for HT and music?), insulations, cables, dedicated line, lighting, etc.. I didn't think about these details until I read your comments, especially Blindjim.

Well, I will take it slow and make it right. Thanks again.
With the current idea of 20% use for video events you likely won't be going to a projector... BUT JIC... the level ceiling approach does entertain some further consideration.

Things change, right? I know they do with me.

i saw some time back a calculator for room sizes which inherently reduce or eliminate nodes.... not sure if I saved that link or not... but it also mentions the actual height of the room as the integral dimension for configuring it's W & L.

it went on to inform that the actual physical dimensions, all 3 of them, determined much of what would be needed for room acoustical correction, with the height being the fundamental property. I believe it also had a calculator one could use that would theoretically disclose nodes for each set of dimensions.

I'm sure a Google search for things like the "perfect audio room size" or such ought to provide you better insights.

If I find the link in my favs I'll post it here later.

BTW my room is about identical to yours and mine has a gently sloped ceiling risinig to 8.6 ft. or so, and my screen and squeakers are on the short wall. Pro is about 10-11 ft away from the screen on the ceiling... and all is well image wise despite the fact I've a DLP that doesn't have the flexibility of many LCD pros in terms of placement and image throw... just keystone (up & down).

there are other considerations too about what could be built into the walls... or ceiling. Depending on how deeply you want to dive into that rabbit hole. One can spend a lot of time and $$$ just in the construction. I even saw braces that went between the studs that you could 'tune' the room with, after all was completed, as it left exposed a set screw device you could insert a torque wrench into!!

ONly thing I'd submit to do in the construction that I wish i had done was place one or two more outlets additionally for ea dedicated ckt you run.... as you never know... and arrange them for specific gear placement. Allowing for symetry in running power cables to the gear, depending on how you'll set your's up. If on the side wall that won't be as critical as setting mono blocks beside each speaker can be.

Placing the sub or subs too …. They’ll need power, right? Until you get set up and shove ‘em around, you simply aren’t going to know just where to plug them in. so having a couple extra even if they go unused, outlets is a very handy thing.

Then too is the thoughts on running the interconnect & or speaker cabling... in wall? In conduit in wall? under the flooring?

Under a rug should not be your first choice now.

Having less lengthy cabling exposed to the eye, but still able to change it out easily sure does add to the neato & polished esthetic of the finished product. That's real important BTW. As nice as can be a dedicated room audibly, cables running about and all over the floor is a subtractive thing.

My upcoming plan is to set monos by each main speaker with short spkr cable run exposed, and place power outlets in the floor adjacent to the amps. That ded ckt will be supplied by the ‘soup du jour’ plc. I can live with that.

Lighting is key too for wow factorization.

Low voltage? Standard? Dimmer? Recessed? Baby spots? Where? How many? Incandescent & partially directional recessed is THE way to go IMO.

I wound up doing std track lighting using a lutron remote dimmer. 8 50w bulbs covers the room well and all are about 18 – 24 in. off each wall. Albeit mine are not placement sensitive as I can relocate them… but don’t anymore.

Lastly, if you’ve the desire or concerns for addressing power line issues, providing a separate service for that room using a iso conditioning transformer, now would be the time to do it. Isolating your dedicated room electrically as well as sonically via in wall insulation upgrades, will be perhaps the most beneficial things you can do for both present and forthcoming equipment and your listening pleasure.

Bottom line in these things is simple…. What you can live with vs what it’ll cost to do it better, always is a good question that I ask myself…. As I’m not in the ‘cost no object’ camp.

Very good luck to you and enjoy!
Your best bet is to build the structure as rigid as possible at the most cost effective way and put the money into proper room treatment.

A conventional room with flat ceiling can be properly acoustically modeled which when built with the right dimensions can be modeled to have the fewest and most benign null points in the room, then with the right types and placement of treatments you can get a good sounding room.
Vaulted ceiling? Are you planning to use a projector in the room one day? If so I would skip the vaulted ceiling. 9 foot flat ceiling would be my choice.