2. analog
  3. 166805-137657

Revox A77 - attaching stainless steel facia

Hi, Gang,

      The SS facia on my A77 was starting to lift from the plastic front panel, so I took it off and cleaned off all of the old glue from both the facia and front panel. It looks like it was installed by a previous owner, as the glue was quite uneven.
      Has anyone successfully (re)installed the stainless facia, and if so, what adhesive did you use? I'm considering 3M 90, their high strength spray adhesive. I've used this on other things and like it. But if someone has a better idea, please share it.

Thank you,
Frank

vinyl_kid
4 responses Add your response
roxy54's avatar
roxy54
8,009 posts
 
The 3m adhesive is very good stuff. I would trust it.
bdp24's avatar
bdp24
9,816 posts
 
Double-sided carpet tape.
Post removed 
robertgsoliz
2 posts
 
We produce our Stainless Steel rainwater systems with a natural slightly shiny surface. We are currently producing our very popular Standard Half Round and Box profiles in Stainless Steel and hold stock of most of the components in these ranges. All other ranges are on a made-to-order service. To complement our metal gutters we also offer a complete range of gutter components including stop ends, ready-made corners, brackets, and outlets. Standard profile measures: 70h x 125w Large profile measures: 95h x 185w Our Half-Round style Stainless Steel gutter is manufactured from 0.5mm Stainless Steel and is supplied in 2.4m lengths, making both transportation and installation uncomplicated. Fitting our Half Round Stainless Steel guttering couldn't be easier, sections are overlapped, jointed using silicone and stainless steel rivets, with pre-made corners and outlets available off the shelf. Fit every 1 - 1.2m’s Fit every 600 - 800mm’s Fit every 600 - 800mm’s
Log in to respond
More to discover
80x80
Lyra Etna SL
80x80
Audio-Technica ART-1000X
80x80
Lenco Ultimate