REL Subwoofers help
You can check your setting by using some test tone: https://www.audiocheck.net/audiotests_frequencychecklow.php and http://onlinetonegenerator.com/subwoofer.html |
The Rel setup instructions are explicit in how to set the crossover and volume level. Read the instructions in the manual. This is a summary of the instructions. 1) Turn the crossover all the way down 2) Play test track 3) Adjust volume until the sub blends with the mains 4) Adjust crossover until sub becomes noticeable and then reduce crossover and make small adjustments to find the proper crossover point Basically disregard what you see visually and tune the Rel volume and crossover based on what you hear. |
I spoke to REL and settings for crossover are not linnear...they recommended roughly 10 oclock 10 clicks as ballpark area to experiment with letting ears make final decision. The REL manual has 15 clicks plus minus three so imho manual is a bit high as a starting point...I suppose if your speaker doesnt go much below 60hz that might be a good starting area |
