2. analog
  3. 1407170375

Rega TT-PSU drops right channel

Hi everyone. Recently my RP6 starting dropping the right channel as soon as the needle hit the record. My routine is (with the TT-PSU powered off):

- place the record on the platter after a nitty gritty clean
- power up the TT-PSU while giving the platter a nudge
- clean record with anti-static carbon brush
- needle drop

First I thought a tonearm wire was loose on the cartridge or something along that line. But, if I switch the TT-PSU to 45 and then back to 33 my right channel works just fine. I know Regas ground to the right channel. Could something be wrong with the cable between the TT-PSU and the table? TT-PSU malfunctioning (I think it is still under warranty).

Thoughts / recommendations? TIA
sbrownnw

Showing 1 response by lindisfarne

lindisfarne
511 posts
 
I had a Rega 3 or 6 (don't remember which) which cut out on one channel too. It was the cable running through the tonearm that caused the prob. Don't know if this helps or confuses.

I love Rega but their "QC" is lousy.
More to discover