Samster777, I am very sorry for what you, and others, are going through, with these issues. Unless I am missing something, you have not mentioned the amplifier you were using to drive the MLs. Have you substituted the Monitor Audios in place of the Logans yet ? I am a retired audio consultant, and have put many systems together for listeners with hearing issues. Using test cds ( or lps ), I was able to determine what frequencies were the most offensive to them, and adding some kind of equalization to cut down on those frequencies, this was helpful. I also found, adding additional acoustic damping to the room, in specific areas, helped quite a bit as well. I believe both of these " fixes " were mentioned above. My best to you. Always, MrD.
Recommended solid state amp for user with tinnitus
Hello all,
I'm 58 and been a music lover since my teens. Through a variety of jobs in noisy work environments (metal working), target shooting, loud rock in my teens, etc., etc., I have been a sufferer of tinnitus for many years.
I am finding the 20-year old Martin-Logan Stylos speakers in my home theater are aggravating the tinnitus. I am replacing them as the front left-right mains in my home theater with the new Monitor Audio Gold 300's (gen 5 2019), along with a PS Audio DirectStream DAC. My Marantz AV7702mkII home theater processor will be the preamp for 2-channel playback. The speakers use a MPD (Micro Pleated Diaphram) high-frequency transducer for the tweeter, 90 dB Sensitivity (1W@1m) • 4 Ohms Nominal Impedance • 3.5 Ohms @1 kHz Minimum Impedance, 250 Watts Power Handling (RMS) • 100 - 250 Watts Recommended Amplifier Requirements (RMS).
I was looking for a solid state amp in the $2000 - $5000 range that would work well with the Gold 300 speakers and keep the sound warm and non-fatiguing with good resolution. Any suggestions are welcome and appreciated. I'm wondering if McIntosh might be suited for my situation(?). Any suggestions for solid state are welcome.
In my office, I have a PrimaLuna HP tube amp, PS Audio DirectStream DAC and Monitor Audio PL100 monitors, and they tend to be much easier on my ears and tinnitus issue. I do NOT want a tube amp for my system that I am asking for recommendations on, no way to place it in my cabinetry.
Thank you in advance,
Sam
I'm 58 and been a music lover since my teens. Through a variety of jobs in noisy work environments (metal working), target shooting, loud rock in my teens, etc., etc., I have been a sufferer of tinnitus for many years.
I am finding the 20-year old Martin-Logan Stylos speakers in my home theater are aggravating the tinnitus. I am replacing them as the front left-right mains in my home theater with the new Monitor Audio Gold 300's (gen 5 2019), along with a PS Audio DirectStream DAC. My Marantz AV7702mkII home theater processor will be the preamp for 2-channel playback. The speakers use a MPD (Micro Pleated Diaphram) high-frequency transducer for the tweeter, 90 dB Sensitivity (1W@1m) • 4 Ohms Nominal Impedance • 3.5 Ohms @1 kHz Minimum Impedance, 250 Watts Power Handling (RMS) • 100 - 250 Watts Recommended Amplifier Requirements (RMS).
I was looking for a solid state amp in the $2000 - $5000 range that would work well with the Gold 300 speakers and keep the sound warm and non-fatiguing with good resolution. Any suggestions are welcome and appreciated. I'm wondering if McIntosh might be suited for my situation(?). Any suggestions for solid state are welcome.
In my office, I have a PrimaLuna HP tube amp, PS Audio DirectStream DAC and Monitor Audio PL100 monitors, and they tend to be much easier on my ears and tinnitus issue. I do NOT want a tube amp for my system that I am asking for recommendations on, no way to place it in my cabinetry.
Thank you in advance,
Sam
- ...
- 38 posts total
- 38 posts total