I purchased some Psvane capacitors a few weeks back and immediately returned them after measuring them. I have a QuadTech capacitance meter that measures DF to six decimal places. Teflon capacitors normally measure about 0.000100 DF ("100"), with the better among them measuring 20 and lower (I measured one at 6 just today). The Psvanes measured 5500, 5500 and 3500 for the three caps I measured. One dielectric that measures that terribly is mylar. Given the small size of the Psvane capacitors for a 600VDC rating, combined with the very poor DF measures, I assume they were mylar caps. (Physical size of a capacitor is determined by the thickness of the plate and dielectric. Dielectric thickness is determined by target voltage and dielectric constant. The dielectric constant of mylar is 3.5, which is almost twice that of teflon, which allows a mylar capacitor to be smaller than an equally rated teflon cap.)
Psvane Teflon capacitors real or fakes?
These are great looking capacitors and supposed to be competing against the Audience, Rel, V-Cap, and Sonicap Teflon capacitors. A couple of my tweaky friends who have no end to new capacitors gave them a try and had one quit after a month or so, and with the wire cut off, no return possible. So they cut it open, yes they are curious, and according to them, the guts looked like mylar, measured like mylar??? Could these not be Teflon caps after all??? I open this for discussion with some of the tweaky electonic minds out there to get to the bottom of this. If they are not genuine teflon, I would not want fellow audiophiles to get ripped by another false claim. But to be fair, real verifiable data should be submitted here, no guesswork. I trust my friends, but I did not do the test, so I open it to other philes. Hey, I like a great deal too, but if it is not as advertised, I get pissed too. Take a look fellow philes, and lets solve the mystery....Jallen
- ...
- 64 posts total
- 64 posts total