PS Audio Power regenerator


My PS audio can support 1,000 W.

Preamp, streamer, turntable and DAC is maybe 150 W, Power amps run 600 W.

My thinking is to only run the small power consumers for 150 W than all to minimize risk of interference with the heavy duty amps.  I am sure someone can help.

dcaudio

Not sure what you mean by only running 150?  Does your PP have 2 sections?

Also, your turntable, DAC and pre take maybe 50 watts.

@dcaudio  You don't mention which PP you are using.  1000 watts is roughly 8 amps, so I'm guessing it's the PP 12, which should be able to deliver 8 amps of constant draw.  That's not a lot, but many systems will only draw 3 - 5 amps while running, leaving a little room for  spikes in the draw.  Running the front end equipment and plugging your amps directly into a separate dedicated 20 amp circuit would be a solution.  You're giving up protection against a catastrophic power surge, but there are ways to protect against that as well.  It could be argued that 8 amps of current is not sufficient for any larger system.  Look at the actual draw when your system is running (assuming here the PP gives a readout) and decide for yourself if you need something different.  If you want to go all in...........

Cheers,

I used to own PS Audio PowerPlants. 3 different models. They did nothing for my system, except for one model which had a surreptitious fan underneath it which made noise in my listeyroom until I discovered the source of the noise. I sold them all and get upper end power conditioners. Much happier. I do not recommend powerplants.

I spoke to Paul McGowan about this exact question last year at AXPONA, and he said there was no benefit to keeping power "reserve" on the regenerators. That is, the performance is the same for a 900 watt laod as for a 200 watt load.

I have about 700 watts running through mine and have no complaints about either sonic quality or heat buildup.

 

 

The PS power regenerator is the biggest gimmick on the planet. It's totally totally unnecessary and actually uses a lot of electricity when it's just plugged their waiting to be used. Spend a lot of money just keeping this box plugged into the wall over the course of a month maybe 25 $30 a month because it's 100 W continuous before it even does its thing to power your equipment.

You rarely hear comments about how it's improved and enhanced sound.

I use a Power isolator from transparent to reduce interference along the powerline and it seems unrestrictive and I can put lots of stuff on this thing. I think this glorified power switch I use is helpful and it makes me feel better.