Problems with Surge Protectors


I tried to power on my Oppo the other night in anticipation of watching a DVD. It wouldn’t power on. Not with the remote and not by manually pressing the power button. After contacting Oppo support and following more than the usual instructions to restore process to my Oppo, nothing worked until I was instructed to plug it into a wall socket. After a few days I returned it to the protection of my Brick Wall, a line conditioner and surge protector that cost me nearly $600. It is advertised to never fail

https://www.brickwall.com/pages/no-failures

No Failures - Period | Brick WallBrick Wall Surge Protectors Do Not Fail Tested to One Thousand Surges of 6000V, 

https://www.brickwall.com/pages/line-conditioners

I then brought out an ordinary power strip/surge protector and the same thing happened; the Oppo failed to power on.

Coincidentally,, I bought a new Roku and when I plugged it into the Brick Wall, it failed to display its menu. I plugged it into a wall socket and no problem, it displayed its usual menu. I plugged it into the power strip and it refused to display.

I wrote to Oppo and asked them why they had told me to plug the Oppo into a wall socket. They replied that they had had some problems with surge protectors and didn’t know why.

I also have my ARCAM SR-250 AVR out for service because  among other things, it wouldn’t power on. The service department where I sent it reports that it operates perfectly. Now I’m wondering if it is having the same problem as the Oppo and the Roku.

I should add that I’ve tested all the sockets on the Brick Wall and the power strip and all will turn on a lightbulb and I’ve also plugged in a power saw here and there and the power saw runs loudly.  
I’ve pulled out a third power strip from garage storage and both the Oppo and the Roku power on.  Returning them to the Brick Wall doesn’t work as they again will not power on.

What is causing this problem???
128x128echolane
Post removed 
How to Tell if Your Surge Protector is Bad: Most surge protectors have a light of some sort. Newer models will have an LED, purple flower wild while older models may have a standard light bulb. If your light is burnt out, dim, or flickering, your surge protector has taken a surge and is no longer fully capable of protecting your PC.May.
But despite being commonplace in the home, these little plastic gadgets can be extremely dangerous when used improperly or when they malfunction. According to the ESFI, over 3,300 home fires originate in extension cords and power strips each year, killing 50 people and injuring 270 more
How to tell if your bucket is empty or not: Most buckets have a handle that you can hold while tipping them over. When nothing come out the bucket is empty.

But despite being commonplace in the home, these little plastic gadgets can be extremely dangerous when used improperly. According to the CDC over 20 people drown in buckets each year.
Something occurred to me since I posted my original message.  There was a *major* electrical storm near my home.  It was severe and it started one of the many major fires in California that went on to burn for weeks.  Perhaps one or more or those lightening strikes affected something internally in the Brick Wall unit, but not all gear plugged into it is negatively affected.
Jimson replied as follows:

How to Tell if Your Surge Protector is Bad: Most surge protectors have a light of some sort. Newer models will have an LED, purple flower wild while older models may have a standard light bulb. If your light is burnt out, dim, or flickering, your surge protector has taken a surge and is no longer fully capable of protecting your PC.May.

My surge protector is not an ordinary one.  It cost nearly $600 and it is advertised to never fail in surge protection.  Ordinary power strips are supposed to be replaced after one major surge, but not this one.  
As I mentioned, perhaps a lightening strike did affect it in some way.
Post removed