Pre/Pro for bi-amping (5.1 configuration)


I have been using my Pioneer Elite SC-65 (using it as a pre/pro) to bi-amp my Bryston Mini-Ts via an Anthem PVA-7. The Pioneer Elite SC-65 has in it's programming the capabilities to drive/send the low frequencies to the woofers on the front speakers using the "normal" and the upper frequencies to mids and tweeters by configuring the surround channels. I am using this as a 5.1 configuration!


I'm looking to update my Elite SC-65 as it's starting to act up. I would like to find a pre/pro that does something very similar that the SC-65 and not just use a Y-adapter as a cheap fix. (See attached screenshot of the SC-65 manual)


There is noticeable difference between standard connectivity from the SC-65 through the Anthem PVA-7 to the Mini-T's versus the bi-amping through the SC-65 and the Anthem PVA-7 to the Mini-T's It's truly noticeable the difference it makes. Just tonight I had to reset the SC-65 to factory default so I listened a while in stand configuration then re-did everything to bi-amping (changed software in the SC-65 and wiring to the speakers) really noticeable and much enjoyable in the bi-amp configuration.


So what would be a good pre/pro to replace the Pioneer Elite SC-65 with something that has true bi-amping within the unit?


joeschmoe
It was just a thought, since you disliked the idea of using a Y splitter so much.

So long as you keep the impedance high enough, a splitter really is going to be your best option then. Cut the amps input impedance in half.

So if it's 30K, when split it's 15k. Make sure your pre/pro can handle that, and most can. Tube preamps will be more likely to have an issue.
Best,
E
Why would I change out amps? My PVA-7 is a superb amp and meets all requirements. It's the SC-65 that is failing! 
Maybe what you need are amps that have in/out instead?

The Parasound A23/A21 can do this.