2. amps-preamps
  3. 160894-109163

Passive preamp issues or?

I have a Nuforce STA 200 that I’ve been using with an Axiom Walker mod preamp for a while now.  Other equipment is a Bluesound Node 2 streamer and a Jolida dsd dac.  Nordost digital coax and Dueland Schroeder IC’s from dac to pre and pre to amp.   Last night, I disconnected the preamp and ran the IC’s directly from the dac to amp, using the volume control on the dac.  The change in detail and depth was not subtle.  Soundstage extended beyond the speakers- everything just sounded better.  However, with the high gain of the Nuforce there’s  a hum in the speakers- it’s not not audible when I’m not playing anything. I’m willing to live with it, but I’m curious why the sound improved significantly by pulling the pre- should I look at better IC’s from pre to amp or is the Axiom subtracting from the sound quality?
renisnceman
georgehifi's avatar
georgehifi
10,312 posts
 
If the amp really has a 1MegOhm input impedance
Oh dear! This is getting like a Monty Python skit.
He doesn’t have an amp with 1megohm input impedance, I’m just saying that the Rogue M120 the only amp I know of that would be an "impedance match" with a tube output source like his with 47kohm impedance.
And btw I’ve had the Rogue M120 here some some time, they don’t hum, with active or passive driving them

Cheers George
atmasphere's avatar
atmasphere
11,794 posts
 
@renisnceman   You might try lifting the ground of the DAC to see if you are dealing with a ground loop. You do this by getting a ground cheater adapter for your its cord at the local hardware store and plugging the DAC into the wall using the adapter. This is only for testing, but if the hum/buzz is eliminated then you will know what is going on.  
renisnceman OP
50 posts
 
I purchased an ebtech hum-x and it made no difference. The Bluesound is quiet but the dac isn’t up to par with the Jolida.  I have a feeling I’m going to have to stay with the passive pre- it’s just a little frustrating knowing improved sound quality comes at the cost of speaker hum.  Might just mean I’ll have to tweak tubes or cables instead, as I’m not sure where to go from here.
coachpoconnor's avatar
coachpoconnor
380 posts
 
A nice inexpensive Passive preAmp for the sta-200 is the Schiit Saga.
More to discover