So what’s the question? Is the cartridge installed and plugged into the phono amp MC input? If so, try adjusting the loading to 50 or 100 ohms, or to whatever sounds best to you.
New MC Cartridge from Wayne's Audio
Hello all,
I really hate to sound like I know nothing about audio,
but when It comes the specifications for my new MC
"Master Signature" cartridge that I purchased from Wayne's
Audio I am lost. I want to be sure to get the best out of this
Wonderful cartridge and I could use some help.
I am using an Arcam SA30 integrated amplifier,
Modwright PH 9.0 phono stage and Technics SL-1100A
turntable.
These are the specifications for the cartridge, any setup
suggestions would be greatly appreciated. Thank you!
Specifications
Cartridge type: Low output stereo moving coil cartridge
Body: Aged ebony
Stylus: Line contact diamond
Cantilever: boron rod
Cartridge height: 17.5mm
Cartridge weight: 7 g
Coil type: 5N OCC Single Crystal silver coil
Output voltage: 0.45mv
Impedance: 7Ω
Load impedance:＞=60Ω
Recommended Load: 75-500 ohms (better from 200)
Compliance: 12um/mN
Frequency response: 20-25KHz±1dB
Channel separation >28dB
Left and right channel balance <0.5dB
Recommended tracking force: 1.8g
Effective tracking range: 1.5-2.3g
Break-in time: 30 hours
- ...
- 3 posts total
- 3 posts total