2. tech-talk
  3. 1392322960

Need help building an amplifier-headphone adapter

Hello

I have an integrated amplifier (12W) that does not have a headphone output and I want to find a way to listen via headphones.

The easy solution would be to find a device like the ASL UHC. But I have not managed to find one for sale in Europe.

http://www.divertech.com/asluhcsignature.html

Now I want to try to build one myself :) Could be a nice project and will add a nice feature to my amplifier.

Does anyone here have experience building such a device as the ASL UHC? Are there any kits or schematics available?

Thanks for any advice.
indiesverige
czarivey
5,946 posts
 
If you have a tape output on your preamp, it will be wise to have a headphone preamp such as http://www.parts-express.com/topping-tp21-class-t-digital-mini-amplifier-25-wpc-with-headphone-output--310-310 which is even easier and better sounding solution.
zd542
5,339 posts
 
I think he wants to use the power amp section of the integrated to power his headphones directly.
indiesverige OP
10 posts
 
Yes I want to run headphones off the power-amp outputs.
yogiboy's avatar
yogiboy
5,656 posts
 
I use a headphone extension cable. I cut the male end off and hook up the bare wire to the speaker outputs of my amp! There are 3 wires when you do this,left,right and the ground that will go to both channels!
czarivey
5,946 posts
 
You may do as Yogiboy did with directly coupled output stage amplifier. That will work if you have relatively high impedance headphones. If you don't, you won't be able to control the volume correctly and will have a chance of blowing either your ears or headphones whichever comes first.
If you have an output transformer in your amp, you'll need to find another transformer to match impedance of your headphones.
More to discover