Martin Logan panel disassembly?

Perfect picture for reference-thanks!

After taking a better look at the assembly, the area I was concerned about is the inside of the woofer grill, which would be the bottom. It's all one piece, I'll just leave it be. 

The new owner can remove it and clean.

I see you mean down here, https://ibb.co/PNTD4bd ??

There shouldn't be be any of esl mylar panel down that far as the woofer needs to breath, you could use an extended crevice tool on the vacuum cleaner for any dust down there.
Cheers George

Thanks, no luck on the ML forum.

I'm aware of keeping the panel clean, and have been doing so. This is just for the woofer area. The grill assembly/stat is 1 panel, so it has to be removed for proper cleaning. No vacuum/brush will get in there without doing so.

I'm getting rid of these to finance BIGGER panels. Fun speaker otherwise, especially for someone curious about stats. 

I think he is referring to just the lower section of the front baffle covering the woofers George....

There is heavy dust build on the woofer baffle area-needs a good cleaning.

This should be done every 6mths (panel discharged.)
The only way is to use the small head on the vacuum cleaner https://ibb.co/RYs0tkQ and go over it slowly up and down and on the panel. Put some soft tape on the head so you don’t scratch the panels black paint.
If you have stuck on greasy dust, then the only way is to remove and wash the panel, can be risky though, but if you search you’ll find they do it.

Cheers George

Try your question here:

https://www.martinloganowners.com/