I just installed a pair of Mapleshade 2" platforms under my B system speakers, Legacy Signature IIIs. The difference from no platform is immense. The bass tightened slightly but the mids and highs opened up tremendously with increased resolution and even better tonal quality . I finally have depth whereas the soundstage width shrunk (it probably was wider due to being blurry). I have no other room treatments in this second system as I don't use it much; however, the room is an excellent shoebox dimension It similar excellent acoustic properties except for behind the speakers where there is an open brick fireplace (a big hole). So, the Mapleshades were a fantastic addition and a bargain.
Mapleshade Isolation: Does Nothing?
Okay guys. I built a Mapleshade-style isolation platform out of a 3” thick maple butcher block and Mapleshade footers (also Isoblocks). This was originally to isolate a SET amp, but after moving to solid state amps and trying to get into vinyl, I used it to try mounting a MoFi StudioDeck, figuring this would benefit the most from the Mapleshade-style isolation system.
Turntable -> Mapleshade Heavyfooters (3, not threaded) -> Butcher Block -> Mapleshade Iso Blocks -> Pangea audio rack (spiked through carpet).
When using headphones and turning up the gain on my preamp, I can clearly hear the sound of lightly dragging a fingernail across the butcher block. I can also clearly hear it when going across the rack shelf the butcher block in sitting on. So, the vibration is being transmitted up through the Iso blocks, through the butcher block, up through the Heavyfooters, up through Derlin platter, and into the needle.
Placing the turntable directly on the butcher block using its built-in spring loaded feet, vibrations are still transmitted but are much attenuated. So, this experiment leads me to believe that the Mapleshade system does JACK ALL. Am I doing something wrong that could lead to this result? Am I misunderstanding something basic about how this system is supposed to work?
Turntable -> Mapleshade Heavyfooters (3, not threaded) -> Butcher Block -> Mapleshade Iso Blocks -> Pangea audio rack (spiked through carpet).
When using headphones and turning up the gain on my preamp, I can clearly hear the sound of lightly dragging a fingernail across the butcher block. I can also clearly hear it when going across the rack shelf the butcher block in sitting on. So, the vibration is being transmitted up through the Iso blocks, through the butcher block, up through the Heavyfooters, up through Derlin platter, and into the needle.
Placing the turntable directly on the butcher block using its built-in spring loaded feet, vibrations are still transmitted but are much attenuated. So, this experiment leads me to believe that the Mapleshade system does JACK ALL. Am I doing something wrong that could lead to this result? Am I misunderstanding something basic about how this system is supposed to work?