Long throw 5 1/4 woofer??


I like very much my Totems Staff with a 5 1/4 woofer. The bass is very nice and deep (for a small woofer), however I wonder what do Totem Acoustic means by "long throw woofer". In their web site they do not list the x-max for this particular woofer. Any ideas about the x-max of this woofer?? Searching the web I found that the woofer is made in Poland (GDN 13/40/2) and in you tube there is a video where the woofer is feed some power so that its excursion is of about 3/8" one way!!! Can this little woofer handle safely an excursion of this magnitude?
tiofelon
Is 3/8" really that much? I think I have seen longer, even on older vintage designs like AR's and KLH's. Seems like size of the cone would have nothing to do with max excursion. I would think a smaller cone could go as long as anything else if the "motor" and surround, etc. were up to it. No expert here, just thinking.
3/8" isn't that much. Some subwoofer designs have excursions approaching 1"...

-RW-
Long relative to a tweeter which is next to nothing.

A rep told me JL audio fathum 13 has 3" of travel. No idea if it is true...
"Long throw", compared to what? Short throw? Sounds like marketing hype to me. Excursion doesn't mean squat if the driver can't produce believable sound; you know, vocals, acoustic instruments, etc.

Another thing, 5 1/4" is generally a midrange driver so while x-max may come into play when thinking about decent bass with "punch", a driver that small is bound to limit extension and dynamics.
3/8" (roughly 9.5 mm) is indeed impressive x-max for a 5 1/2" midwoofer. It is harder to build that much excursion into a small-diameter suspension system than into a large-diameter one. In general there's a tradeoff relationship between long excursion and good top-end extension, but sometimes a dedicated designer can find a way to meet seemingly conflicting goals.

Duke
dealer/manufacturer/no affiliation with Totem
These days, companies use the term "long throw" for anything over 5mm one way. Typical cheap woofers will have Xmax of 3mm, even less. But it's not like 5mm is gargantuan or even uncommon. Most decent woofers available from SEAS, Peerless, Scanspeak, SB Acoustics, have Xmax values of at least 5mm on their drivers of that size.
http://www.madisoundspeakerstore.com/approx-5-woofers/sb-acoustics-sb15mfc30-4-5-poly-cone-woofer/
It's great that small drivers can deliver decent bass levels and makes small monitors attractive, especially for someone who doesn't require concert level SPLs. But attempting to get 100dB at 40Hz from a single 5" woofer is just begging for massive amounts of distortion. High levels of bass energy are best left to drivers designed to produce it.
I use a pair of very dynamic Silverline Preludes (latest model) with two amazing 3.75" (I measured 'em) aluminum/magnesium woofers per speaker, and they sound great...I use a good sub but still, they somehow kick it. I informally (I may have been wearing shorts) measured them with a test CD and they woof down to the upper to mid 40s or so (hype/specs notwithstanding). Gigantic double magnets on each woofer, and although I haven't actually measured the "excursion", excurse they do!
Excursion might move some air but getting anywhere near limits is guaranteed distortion. Makes it seem to sound louder though.