Kinki Studio EX-M1


I’ve always wanted something simple and not a jack-of-all-trades when it comes to my stereo. KISS (keep it simple, stupid) is something I use in my approach to most things in life. Why overcomplicate? The Kinki EX-M1 is just an integrated, and that’s not meant as a pejorative. There’s no DAC or streaming capabilities, or room correction algorithms built in, and it won’t fold you laundry. There are 4 inputs out back, three unbalanced (RCA) and one balanced (XLR) which I’ve read is a simple and not a true balanced. Either way, it adds another type of input which can come in handy. The binding post are copies of WBT versions and are a joy to work with.

It has a frequency response of 10-150kHz (+/- 3db) and outputs 215W into 8ohms. It retails for approx. $2,200. Here is a link to more specs:
https://www.vinshineaudio.com/product-page/kinki-studio-ex-m1

Because of it’s silvery finish it has an imposing appearance but compared to my black Marantz PM-15S2b, it’s about the same size. Personally, I love the look. When they say it’s built like a vault, this is the vault they refer to. The weight is imposing as well (55.12 lbs.) so take care when maneuvering it. You can turn it on with the remote or by pressing in the selector knob on the left. Turning it off is done by pressing and holding the same knob for 5 seconds, or by remote. The default volume setting when turned on is set at 10 so make sure to turn it down to 0 before playing anything unless your speakers are of low sensitivity. A well made manual is supplied but alas, it’s only in Chinese, but Alvin told me they’re making one in English.

Having 255 steps of attenuation gives one extraordinary range to get to exactly where you like to listen. You can go up 10 to 15 steps and not notice much of a change, at first, until something dynamic asserts itself or when you realize that in general, it’s now more impactful. Using the remote allows you to quickly go through the steps and adjust on the fly. I find this most handy and now use it to tailor the song or piece of music to my tastes.

As an integrated, it simply excels in it’s purpose. As verbose as I can tend to be, it leaves me speechless in describing it. It does nothing to detract. It does everything to commend. It’s incredibly fast and yet so utterly smooth. Musical presence is immediate but not etched, hyped or shrill. It’s light on it’s feet but can pounce and stomp when called for.

Liu, the amp’s designer, does not believe in exaggerated base and yet this amp goes lower, tighter and simply growls tone, details and ambience that I haven’t heard before. Lower registers of the piano left me slack jawed as I basked in the reverberations of the soundboard. The same goes for cello, guitar, percussion and massed strings. Imaging is the best I’ve heard in my system. Nothing wavers (unless done in post production) and separation is tops. With The Milk Carton Kids, the two of them finally are completely separated and at a greater distance apart than what I’ve been used to or thought they’d be. Small chamber music pieces have me scanning the soundstage as different pieces play distinctly in their own space. Back up vocals are distinct as well with no smearing. They may harmonize but they are clearly different.

Highs are fully extended, again, beyond what I’m accustomed to hearing. They can go on well into a piece and you can hear the decay even when some bigger play takes center stage. Bells and chimes can tickle like the real thing. And speaking of stage, it’s of one piece, the same no matter where you care to go. All the way left, right, up or down, even as far back as you care to look. The strength of the music lies everywhere you care to listen. The only limits are what was done in the recording.

It has no noise floor that I can detect. On Abdullah Ibrahim’s The Song Is My Story, he’s not up on stage, as usual, but I’m sitting next to him while he plays (I listen in the near field so that helps). The piano is the full width of the soundstage, steady as a rock, and the notes flow out around, up, and beneath me (great mike placement). Notes can and do come out of a completely black background unless the recording is done with less tricks and then you easily hear the venue, the room, the stage, the setting. And, I never thought I’d say this but FM now sounds pretty fantastic, considering it’s limits.

The sound is so pure that it’s reoriented the way I listen to music. I no longer listen analytically but for the sheer pleasure. It’s so rewarding and relaxing. Listening to favorites, I’ve noticed that some sound different enough for me to notice that there was some exaggeration or emphasis of certain parts of the frequency with my older set up. Whether it was the house sound that some say certain brands have or just the limits of the design I can’t rightly say. Maybe it’s all the extra circuitry added to accommodate all the extra features I have no use for. No matter. I’m content. Happy as a puppy with two pee pees.

Also, I have to give thanks to Alvin for his great customer service. He’s the most attentive distributor I’ve dealt with. His response to any question I had were immediate and thorough, as long as one is mindful of the time differences (just check your clock on your smartphone to coordinate appropriate time zones). 👍 He even followed up with shipping notices, delivery times, and any question I had with the unit’s operation or features, which reminds me, since it draws about 30-40 watts when on, make sure to leave it in standby when not is use. It can get very warm to kind of hot, but not hot enough for me to lay my hand on it for any length of time. If I had more space it wouldn’t be a concern (it cools off quickly). That leads me to believe that maybe since my JBL 4319 monitors are 92db, and that it doesn’t take much to make them sing, that the EX-M1, which is a Class A/B design, operates in Class A for the first several watts, which could account for the warmth of the unit along with the wonderful tonal density and texture. Someone with more know how can look into that.

All in all, it’s the best money I’ve spent and now I have no desire to upgrade to some PC based system. My CDs and SACDs sound fantastic, even the old ones along with the reissues. To think you’re getting a real taste of what the well heeled have been enjoying for a fraction of the price makes this a true bargain if there ever was one. Let me also add that I received no consideration from the manufacturer or distributor and these are my views and opinions.

All the best,
Nonoise






128x128nonoise
Post removed 
@nonoise,
Question for nonoise, i heard silver or silver plated cables create a high pitch? 
Nope. I use silver cables exclusively and they're's not high pitched at all. They are very accurate. When horns play, they have that brassy sheen and corresponding SPLs like you'd hear in a small, live jazz venue.

Female vocalist with great range also have the appropriate SPLs and can sound forward but not offensive. Bass is also deeply extended, textured and full. Separation and layering are top notch. Dynamics too.

I've had silver cables that didn't do the trick and were bright or etched and caused listener fatigue. I've also had some that sounded just like copper cables. My present cables don't. 

All the best,
Nonoise
I'm using Darwin Ascension ICs and right now I'm breaking in a pair of Darwin Truth II ICs. My speaker cables are Cabledyne Silver Synergy.

All the best,
Nonoise
hey guys the thread is pretty quiet, thought I'd upload some content :)
Keep in mind I have the amp in a non air conditioned bedroom in hawaii where 83f is the average temp this week.

other measurement is oppo sonica dac

https://imgur.com/GNML6D6
https://imgur.com/S7xW2GT
You really should demand a warranty replacement so the rest of us know whether it is a valuable one. 
Al has already replied to my concerns about the heat generated by the Kinki and that some gear he has operates at around the same temp and not to worry about it.

Being in Hawaii with such ambient heat would be a concern but of no more concern than owning tube gear, I suspect. Where I live, in L.A., it's more humid than usual and due to the confines of my media cabinet, the Kinki does get hot so I just clipped on a small fan to the back of the stand and aimed it at the back of the Kinki.

There's enough space around the unit to vent with forced air and it cools down very quickly to just barely warm. If I were able to have it in a larger cabinet or on top and fully exposed, I wouldn't worry about it. I'd just point a fan at it from a distance and that should put to rest any concerns you have about the heat.

All the best,
Nonoise
Check out the AC Infinity temp controlled fan line!  I use them. They have several that would simply lie on top of the Kinki and exhaust the warm air. Mine are dead silent. 
70-80 hours in, is it me, or the amp?  Soundstage seems more full, with great detail and localization. Old recordings on cd sound better and more detailed than ever. This is purely subjective, and may not be real, but it sure seems real. 
Rest assured, it's real. 👍
Mine is bordering on the spooky side of realism, forcing me to rethink a whole lot of things.

All the best,
Nonoise
Well, I certainly hope that is ahead for me, but I’ve got a one box solution for sure. 👀. I’ve got a spare remote coming. I tend to lose them. 💩
Listening to my Darwin Truth II ICs break in over this weekend was an eye (ear?) opener. They fully complement the Kinki's mission to bringing clarity to a level I've not experienced before. 

They were good sounding out of the box but still needed improvement. Imaging was a bit too pinpointed (smaller than usual) and all except vocalists were a touch on the weak side of the equation. Twice I popped in the Ayre CD treatment disc and left it on silent repeat for an hour and a half twice, listening between treatments to check in on the progress.

It was when I popped in a Johnny Cash CD for my usual two reference songs that I ended up listening to the entire CD, glued to my seat. He and his accompanying players were in the room, performing before me. The same with Paris Combo and Sarah Jarosz. I'm not being hyperbolic when I say that these Darwin ICs are an essential accessory to the Kinki, or to any system of a highly resolving ability.

As much as I loved the Darwin Ascension ICs, which were a big step up from their entry line Silver ICs, these Truth II are of the same magnitude better, if not more so. Sorry to sound like an advertisement but I'm as serious about these ICs as I an about the Kinki. They're a match made in audio heaven.

All the best,
Nonoise
Jesus, Nonoise, around 100 hours or 11 days, I “think” it is starting to happen! Either you’ve coopted me, or it is real! The sound stage is getting wider and well defined, vocals sound live! I don’t know, maybe it’s bad drugs....😍

emmylou Harris is standing in front of me. 😘🔚. Near 3d is getting better, too. 🙀
Hey maritime51, it's reassuring to know that it's not all in my head. 🤪

As for drugs, and booze, for that matter, this Kinki could be one of the steps of a 12 step program towards a cleaner life. 👍

You'd be so taken by the music that it would be your escape for the drudgeries and vagaries of life, along with all those slings and arrows.

All the best,
Nonoise
This is crazy. The image has depth and substance. I’ve NEVER believed solid state had a break in, but....🚽

i wish Alvin would get the design engineer’s comments on this....👀💰

yikes, this is crazy. You can actually move your head around and in the sound stage. 🤢

I’m thinking things I did in the sixties are revisiting. 
I’ll pm you.

the soundstage continues its apparent improvement-weird, but nice!  😱
saving all my thoughts for my review.
my soundstage is more 3d, highs are sweet, bass is tight and deep.
I was shocked my 150 watt ayre power amp and deHavilland pre had more powerful bass.
Post the review soon!  My bass is better than or equal to my Rotel Rc/rb 1590 combo. 
The base I had with my Marantz was thicker sounding but not as deep, tight, detailed and textured as my Kinki. I'm getting mid range guitar notes that excite my wall heater that used to be excited only by the base. 

It leads me to believe that what I used to love was a euphonically enhanced base that sure sounds nice but in the end, was not as accurate.

There's still some break in to occur now that I have the Truth II ICs so I'll have to reserve judgement some more.

All the best,
Nonoise
As I said, earlier, there is a zone of sound stage that I can literally put my head in, and move around, nearly like a live performance. I wish Alvin would have the design engineer comment as either I’m imagining this, or it is new to me. My McIntosh gear didn’t do this. 
Since my last posting I plopped in that Arye CD treatment disc again and let it run for another couple of hours and put on some Devil Doll and then some Stacey Kent and found myself sitting glued to my seat (more like melted into it).

The combo of the Kinki and the Truth II ICs have, for all practical purposes, erased my speakers as the source. I’ve never had this level of depth, image placement and separation, not to mention the usual line of "where did all that other music come from?"

LIke maritime51 says, it’s almost holographic. I’ve said this before whenever I’ve achieved a new level of performance but it’s never been more relevant than now, but this is why I love this hobby. 😄👍😄👍😄👍

All the best,
Nonoise

Try Matapedia by the Mcarrigle sisters, Anna and Kate. You won’t believe it. 
mboldda1   I'd appreciate it if you would expand on

"I was shocked my 150 watt ayre power amp and deHavilland pre had more powerful bass."  

Were you disappointed in the bass you heard?   TIA

no, the kinki has great bass, I was not expecting the ayre at 50 watts less to have a more room shaking bass as I had considered the ayre to be a little lean sounding at times. now the kinki could be going through one of it's burn in rollercoaster rides on it's way to 300 hrs.
yes I did purchase it before I told Alvin I am writing a review.
I bought it after all of the positive word of mouth and figured if I didn't like it with the demand I could recoup most of my money back.
As I said, earlier, there is a zone of sound stage that I can literally put my head in, and move around, nearly like a live performance. I wish Alvin would have the design engineer comment as either I’m imagining this, or it is new to me. My McIntosh gear didn’t do this.

Reply from Kinki Studio chief:

"It's the results of high bandwidth, high slew rate, ultra-low latency and the right dose of bias. Specifically on how to achieve this? - Trade secret. :)"


Thanks, Alvin, for asking, and tell him I don’t understand a word but he has my respect.

Since ole nonoise was dead on about the amp, I just bought and started using some Darwin Ascension II interconnects. First, like Alvin, Tony Bender is a very fine person to deal with, and though I’ll have more to say later, the sound really compliments the ex M1. Damn, nonoise, you really are getting me in deeper.

Anyone else out there with this amp?
Hi guys, I decided to participate in the discussion here since there wasn’t much activity about the Kinki amp in our local forum. I’ve had the ex-m1 for about 2 weeks now, and I agree with everything you guys have said. Fast but smooth, highly detailed, transparent, superb bass control and transients.

However, I want to ask if any of the other owners find it lacking juice reserve. I’m playing in a relatively small dedicated room, 13’ by 10’. Regular listening volume on most albums doesn’t exceed 30, but I sometimes crank it to 50+ when I want to play slightly louder. That said, there are certain tracks or albums that require much more juice for it to sound properly dynamic and loud. A couple of these tracks are Hans Theessink - Mississippi, and Hugh Masekela - Stimela (The Coal Train) from The Dali CD 1. On said tracks, I have actually pumped up the volume to the max 255, without it sounding unbearably loud. But then again I’m on the ’low gain’ setting, connect via rca interconnects. Understand from Alvin that ’high gain’ is only +4db.

Though I’m not a person who listens at a high volume often (at night my listening volume is 10), it is fun to crank it up occasionally. I don’t think my speakers are particularly hard to drive, as they rate in at 88dm/8ohms (only dipping to 6.4ohms). But this worries me a little, as I have never ever in my life, cranked up an amp to max volume. My previous Job INTegrated, though rated lower in power, felt like it had a lot more juice reserve than the Kinki ex-m1.

Wonder if the other owners can chip in and share their experiences.
That's been the opposite of my experience..  I usually listen between 10-15 on low gain..  but I do listen very close to speakers...  But it seems to have as much power as my Odyssey kismet 200 watt monoblocks which have like 180000 uf in filter capacitance and 650va transformers each..  speakers are 86db 8ohm bookshelves..  would using high gain help you keep the volume control in a more useful range?
@martine51,
I'd never steer you wrong. 👍 Not after the Kinki recommendation. I feel that what works for me can be of benefit to others.

@benlzy,
I don't have the newer version with the gain switch but even then, I've only had to turn it up to 80-90 when playing opera, to get close to the full effect of a live performance, but then, my speakers are 92db. 

I did, however, go up to 200 with my older Clearwave Duet 6 monitors that are 85db and I could have went higher. With both speakers, it all depended on the recording, which can vary a lot. 

All the best,
Nonoise
@uncola 
The volume increment from 0-30 is quite substantial, but the gain from 30-255 I feel it probably less than 10-30. At the 100+ range, you can crank up 10-20 notches without even perceiving an increase in volume. I'm listening to them in a rather near field setting too (small room), about 6' away from the spks.

@nonoise 
Yea I guess it's all about the recording. I will switch to high gain then on those albums. 99% of the time I won't have to go into the triple digit range, but it's just startling to me as I've never max-ed out an amp before. There was no distortion even at max volume though, which accounts for something.
@benlzy curious to hear your thoughts on how the EX-M1 compares to the JOB integrated....
@vingard

I have had the Job INTegrated for 3 years. During this period, I have heard many other systems out there - at friends’ places; HiFi shows; dealer shops etc. Singapore is a really small country and a visit to any ’hifi location’ typically takes less than an hour of travelling, so everything that you want to listen to, you sort of can.

In these 3 years, I have never been tempted to replace the Job INTegrated with anything else, despite all that I’ve heard. For me, the INT sounds great and provides excellent value for what it costs, and I know that I have to spend considerably more to achieve the performance it delivered, if I decided to ’upgrade’.

The INT is not without flaw, but it fits splendidly in my system. Despite it not being the most resolving, dynamic or refined sounding dac/amp, it had a great tonality and musicality which I find lacking in plenty of ’high-end’ systems. They just go loud and attack you with thunderous bass and punchy dynamics - not what I’m after.

However, with time, my itchy fingers made me change some things in my system, which resulted in a snowball effect - everything suddenly became a bottleneck, and the Job INT too, couldn’t match up to the ’upgrades’ I brought in. In came Alvin, who provided me an opportunity to try the Kinki dac. Needless to say, I was impressed by it, and decided to get both the Kinki dac and amp.

So with this back story out of the way, let me try to describe the sonic differences. This is a comparison between the Job INT and the Kinki dac/amp combo. RCA connection.

The Kinki combo has a very, very low noise floor. You have to strain to hear the electronic hiss with your ears beside the tweeter. The INT however, is rather noisy, and you can start to hear hiss from the speakers about 2’-3’ away.

The Kinki combo is also way more detailed and dynamic than the INT. Bass growls and punches you hard. The INT in comparison, had a rounder bass which is definitely not as tight or defined. Bass lines aren’t particularly clear with the INT, when compared to the Kinki combo.

The Kinki combo also has a wider soundstage and depth. You get a better sense of air around each performer, and everything has its place in the soundstage. The Kinki also doesn’t lose its composure when it goes loud. There is no perceived distortion even at max volume. The INT however, though it may go louder, starts to lose composure. At loud volumes, it kinda struggles and you’ll start to feel that all you’re listening to is a wall of noise without much depth.

Before getting the Kinki combo, I was worried that it would sound too sterile and clinical but it proved otherwise. I still prefer the INT’s tonality as there’s more warmth in the mids, which makes it sweeter and more enjoyable, especially with female vocals. However, I’m not losing sleep over this as the Kinki combo is really outperforming what I thought possible in its price bracket. I’m also only using the stock power cord that came together for the dac, as I didn’t have a spare ’audiophile grade’ cord lying around for this additional component. I don’t want to step on anybody’s toes, but to me, power cords do make a difference in the sound, and I think the Kinki combo can only get better as I start to tune it to my liking after the dac and amp are properly burnt in.
Great précis, that tracks my experience except I’ve never heard the other amp. 
Just to clarify, the INT is quite sensitive to power cord changes; the warmth and musicality I’m getting may very well be attributed to the cord I’m using with it, the Branda from Telos Audio. This cord retails for more than the INT but my idea was that, since I’m already saving on other equipment and interconnect costs, might as well feed the INT with an awesome one. I don’t really follow any equipment to cable cost ratio. As long as it sounds good to me and is within budget, I’ll go for it!

Maybe after I replace the stock cord on the Kinki dac with a proper one, I’ll get the same musicality and lushness I did before, only this time with way more detail, refinement and control.

I don’t understand how the amp can feel cool to the touch to some of you here. Mine gets freaking hot after extended play time, if I don’t turn on the air-conditioning! But then again, Singapore is pretty hot all year round so probably that’s why.
I live in an air conditioned house in the Pacific Northwest. My Kinki is always cool. I’ve been to Singapore. Beautiful place, with lovely people but hotter than Hell. 
@benlzy  Great comparative write-up. Thanks for sharing your findings.

A major +1 regarding your comments on the power cord.
@benlzy,
Thanks for the detailed comparison of the JOB INT and the Kinki.  As @david_ten says, that power cord should make a difference on the DAC and may go a long way add some of that warmth you're missing.

When I upgraded the power cord on my SACD player the base went deeper and stronger along with increased dynamic and a fuller, overall sound.

All the best,
Nonoise
@benlzy, you have to start a review thread on the kinki dac.
I was thinking about it.
have you compared it to the denafrips pontus dac?