2. amps-preamps
  3. 1279437878

JM Lab Diva Utopia problem - need help

Hi,

I am using a pair of Diva Utopia Be. Today, I noticed the sound from the mid range unit of one channel become very funny, it become unclear with background noise. The tweeter works fine and so is the woofer. If I put the amp into mute, there is no noise. I switch it to another power amp as I am using monos, the problem is still there. So I figured it can be the speakers. Has anyone experienced the same problems?
jeq
4 responses Add your response
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
You may have a blown midrange. It happens with almost any driver if you overdrive them or feed them to much clipped/distorted signal.
p100
17 posts
 
I am not sure this would help. I had similar problem in my energy speaker. After trouble shooting a little, I jumped to the conclusion that the speaker has the problem. I actually removed the speaker for fixing. In the end, it was one of the tubes in my amplifier. If you have a tube amp, you may want to make absolutely sure it's not any part of the amp first.
jeq OP
17 posts
 
Thank you shadorne and s100. I have luckily resolved the problem. There is actually some dust (or small insects) stuck in the tiny opening around the center part (not sure how it gets there another theory is the glue comes off a little bit). So when the unit move back and forth, it makes noise. I managed to remove that using vacuum and the problem is gone.
johnsonwu
469 posts
 
I have a review of Diva Utopia's posted here on Audiogon just now.
Log in to respond
More to discover
80x80
NAD M12 + M22
80x80
Krell Theater Amplifier Standard
80x80
Zesto Audio Leto 1..0 Preamplifier
FREE SHIPPING!!