Sean, I am going to forward you an e-mail about a pretty beefy transformer...I would like you to look into it. I have already forwarded the e-mail to Dejan Veselinovic of Yugoslavia and Hans-Martin of Germany and am awaiting their feedback. We have been discussing this subject in the Zero Distortion forums (www.zero-distortion.com).
I want to make a good move about this. My system is sounding so musical my feet can't stop tapping...they get tired and have to switch legs! |
Dweller, the devices that i and others have mentioned are typically adjustable ( to some degree ) as to what voltage you want out of it.
Some of the better devices ( read that as "more costly" ) actually employ isolation transformers and may even separate different banks of outlets with filtering. I know that some of the Tripplites have isolated outlets, so you could power your digital gear from one set of outlets and minimize the "hash" from them being transferred over into the other outlets. How well any of those type of devices work for audio is anybody's guess though.
As to the website that i was looking for, i forgot to look for the info that i had at work. I'll staple a note to my forehead so that i remember to write it down tomorrow.
I was able to find out that the "500 watt" Sola weighs 59 lbs and is "harmonically neutralized" i.e. it has filters. The info that i had also says that current limiting kicks in at around 800 watts, making it notably more powerful than it's rating ( 60% headroom ).
Out of curiosity, how much do the Monster AVS2000's weigh ? Sean
> |
I own the Moonster AVS2000 --Right now it is adding 9.00 volts to make the dif.of the 120 I should have... The TV picture is the most obvious tell-tale indication. Before I got this baby I had to wait till after 7 or thereabouts;to get a good picture. |
The important part of Darrylhifi's post is: "I notice when the meter is close to 120v the system sounds and looks {TV} better , than when the meter dips to around 115V." Is there a voltage regulator/stabilizer that can be programmed to hold at a given value (e.g. 120 volts)? this is what is needed... |
Most power companies are running anywhere from appr 115 to 123 volts with the median figure being between 117 - 120 volts from what i can figure. To me, that is a good thing. Slight sags are not as noticeable that way and most all equipment is designed to handle those voltages. Sean
> |
One possibility would be to purchase a high-capacity line voltage regulator from a surplus store. These aren't too hard to find and are usually cheap (~100 bux). They will give you excellent voltage regulation, just be sure they have the capacity to power your amp. You may then need to add power conditioning because the old VR, while it will hold the voltage rock steady, won't necessarily clean up the junk on the power line. |
I am currently having my own dedicated lines put in. Following the lead of abstract7 in a previous thread, I (actually the electrician) will bring a 220 line from the box to a stepdown toroidal transformer which will the put out 110 Volt of what will hopefully be good power. I believe if 220 doesn't actually come from the box then 110 won't leave the transformer. Still it does seem like it should have a better chance at goodpower.
Any opinions?
By the way, I thought we use 110 volt or is it 120? |
What about phase shifts, Sean? |
Monster Cable makes a voltage regulator that retails for $1500. I'm not sure, but I think the PS Powerplant, which is considered the finest sounding device, also keeps voltage at one of several preset levels. |
I used to be able to purchase commercial grade Sola brand voltage regulators rated for 120 volts / 500 watts continuous ( enough for ALL your line level components ) for less than $300 including shipping. If i remember correctly, i think that these units weigh appr 65 - 85 lbs. I can't seem to remember where this was from though, so i can't verify availability at this point in time. I will do further research on this and ( hopefully ) post some results within the next 48 hours. Keep in mind that this is not some type of device that you plug into the wall, as it would work best with a direct run to your breaker box. Sean
> |
Equi=Tech Balanced Power....http://www.equitech.com/ |
Check out cinepro. They have 10 and 20 amp power supplies, they keep the voltage at 117 vac. The balancer with the regulater is an awsome setup. |
Darryl, you would need to have some type of line regulator or regenerator installed. There are units that will do this for you, but it would be phenomenally expensive to power a large amplifier. If you were looking to do this for strictly the line level components ( no amps or a VERY small amp ), there are pieces available. While they will maintain the voltage, i have no idea as to what they would do for the sonics. Sean
> |
