I need help with hum


I've just hooked up a Panasonic DVD A120 to my TV. I've run the component video inputs into the TV but when I run the audio outs to my preamp (a Bryston B-60) I get a nasty hum. What can I do to eliminate this. Will Mondial's magic splitter work? This is my first foray into HT so any help is appreciated.
128x128jond

Showing 1 response by patmatt

If you are using a surge protector/line conditioner with a 3 prong cord, lift the grounds on all of your other components that use a 3 prong cord that happen to be connected to the surge/line unit. If you have already done this and the problem is still there, you may still have ground loop problems from your cable/Sat. provider. There are devices you can use that will eliminate that problem. Radio Shack sells them, or you can go to your local Home Theater dealer and possibly pay through the nose for the same sort of device in a fancy jacket. Tributaries makes a pretty good one that is not too expensive.
Good Luck