How to fill speaker stands

Firstly, this is an outside or in the garage job. Use a large Pyrex measuring cup to scoop from the bag and slowly pour into the top of the columns while gently shaking the pillar to move the sand into the hole. Keep doing it until about half of the column is full.

Great debate ensues as to how full to fill each column. Many say all the way will kill too much of the speaker energy dulling the dynamics. You can always experiment with filling and emptying after listening to results.

VERY IMPORTANT: Do not forget to remove all moisture trapped within the sand. The easiest way is to bake the sand in a Pyrex or pan in the oven for 20-30 min at 200 with occasional stirring. Let cool afterwards. Don't touch. VERY HOT.

That's why I went with kitty litter. Any moisture in the sand and it becomes impossible to work with. Good luck.

If you cut the bottom off a plastic milk jug, you'll have a large funnel. If the posts to be filled are narrower than the milk jug opening, maybe a 2 liter soda bottle? John