I was having issues with a consistent WiFi connection so I went with an Ethernet cable from my router to my Innuos Zen MK3 streamer. I’ve had a great experience with Blue Jeans Cable. This time was no different. I ordered a cat 6a cable made to the length I needed. It came with the test report so I knew it was tested. It sounds great. No issues dropping the connection. I didn’t try another cable. Why would I. I go with what works and don't worry about FOMO.
How can different CAT5/6 cables affect sound.
While is is beyond doubt that analog cables affect sound quality and SPDIF, TOSlink and AES/EBU can effect SQ, depending on the buffering and clocking of the DAC, I am at a loss to find an explanation for how different CAT5 cables can affect the sound.
The signals over cat5 are transmitted using the TCP protocol. This protocol is error correcting, each packet contains a header with a checksum. If the receiver gets the same checksum then it acknowledges the packet. If no acknowledgement is received in the timeout interval the sender resends the packet. Packets may be received out of order and the receiver must correctly sequence the packets.
Thus, unless the cable is hopeless (in which case nothing works) the receiver has an exact copy of the data sent from the sender, AND there is NO timing information associated with TCP. The receiver must then be dependent on its internal clock for timing.
That is different with SPDIF, clocking data is included in the stream, that is why sources (e.g. high end Aurenders) have very accurate and low jitter OCXO clocks and can sound better then USB connections into DACs with less precise clocks.
Am I missing something as many people hear differences with different patch cords?