High performance electric outlets


I just moved into an apartment which has the weakest and most feeble outlets I have ever seen. There seems to be so much confusion and controversy about this subject that I have no idea where to start.

My apartment has the electric panel in the pantry closet, so I will be able to draw 220V for my ONEAC 3000W isolation transformer. The transformer has two 110V outlets and feeds all my system. I would also need two or three more outlets in a power strip next to my equipment.

Should I just get something like two of those orange Leviton Hospital Grade outlets from Home Depot ($11.00 each) to replace the ones in the isolation transformer or is it really worth to go the 'audio grade' route? If so, how can I make an educated decision?
psychicanimal

Showing 1 response by hdm

My experience with outlets over the past year and a half or so leads me to believe that there is literally a truckload of misinformation or disinformation on receptacles out there. I have tried a number of outlets from various manufacturers, and the best stock outlets I used were Hubbell 8200/8300 hospital grade, although I did not use a stock Hubbell 5362. The Jena Labs is a stock Hubbell 5362 that is cryoed, and both the Hubbell 5362 and 8300 are available cryoed from Audio Excellence/World Power, for $55 and $60 respectively. I can say that the cryoed 5362 is substantially better than the stock 8300 (which is also the basis for the PS Audio receptacle) and believe me, I was very skeptical that there would be much improvement. I posted a review of this receptacle at Audio Asylum (in the cables section) and tried to post it here, but apparently it didn't go through. Haven't heard the FIM, and wasn't keen on the Pass & Seymour stock receptacle that the Acme is based on.