2. misc-audio
  3. 1206329652

Do you swap cables when using a headphone amp?

My phono stage has one output which will be connected to a Pathos Classic One MKIII. The Pathos does not have a headphone jack so I want to get a great sounding headphone amp to use with my Sennhieser HD650s.

I've never used a headphone amp and I'm assuming you would connect the phono stage output to the headphone amp input. But it doesn't make sense that you would swap the cable every time you changed from headphone to speakers or visa versa. What am I missing here?
0thd
4 responses Add your response
sidssp
1,077 posts
 
If your Pathos has a tape out, you can connect the headphone amp to it. If it doesn't, you will need to use a Y-connector or swap cable.
riffer
362 posts
 
or a switch box or pass the signal through the headphone amp to the Pathos, if you get one that has that capability.
0thd OP
22 posts
 
Excellent! Thank you. The Pathos has Tape in and out loop. It's been 20 plus years since I've used a tape recorder that I just looked at those connections and thought, "Well, I'll not be using those for awhile."

I just thought that with this nice gear, there had to be an elegant solution.

I would also think that the preferable way would be to come straight out of the phono stage into the headphone amp.
swampwalker's avatar
swampwalker
5,138 posts
 
Tape loop is the way to go, unless you buy a headphone amp with a loop out on it. Either way, should not make much of a difference either way.
Log in to respond
More to discover
80x80
Dogeared Audio Aikido 6SN7/5Y3 Preamp
80x80
Adona Corporation Eris 4C
5-shelf audio isolation rack
80x80
Wilson Benesch Eminence