Curious about the difference in what I’d hear on different tonearms


I’m relatively new & most of the numbers & concepts people talk about are still over my head. I do basically understand that different tonearms are a better match for  certain weight cartridges. To reduce the variables I have a Lyra Delos cartridge & a Rega 330 Moth tonearm & I only want to compare up the Rega models without advice thrown in about different cartridges.  Here’s my question, with that setup & all other things being unchanged, what actual difference would I clearly hear if I changed the tonearm to the Rega 808 & then between 808 & the 2000? Please-“I’d never use a Rega... get an ABC model 1234”, same related to the cartridge or other parts of my system... it’ll just confuse my understanding of what you’re teaching me.

Thanks


tochsii

Showing 2 responses by mijostyn

Millercarbon, you'd be making a big mistake comparing other suspended tables to the Linn. It does not matter what tonearm you put on a SOTA, SME, Basis or Air Force. They will all be perfectly stable. Nothing is stable on a Linn. The resonance frequency of say a SOTA Cosmos is down at 2-3 Hz far below the 10 Hz frequency of a properly set up tonearm. It is fun to watch. Give it a push and the whole shooting match just bobs along together perfectly stable.
Fixed tables can be a real problem in many installation situations but you can put any of the four tables mentioned above just about anywhere.
It always helps to have your system located on a cement slab if you have that option.
Hi tochsii. The Delos is a fine match for your arm. All the arms you ask about are about the same effective mass. If there is any difference sonically with the Delos in all three arms set up correctly it would be so slight the most people would never be able to distinguish between them.
I'm not sure I could. Anybody who tells you there are worlds of difference is probably related to Adam Schiff.