Comparing Powerline Ethernet to WiFi for streaming audio


Thought I would share my findings.
I have a ROON based music server system with Tidal and Qobuz streaming services. Using Small Green Computer’s SonicTransport i9 Optical as ROON Core, connected via optical cable to a Sonore Optical Rendu (powered by Sonore Linear Power Supply) acting as ROON endpoint. This then connects to Chord Blu Mk 2 via USB, which upsamples and connects to Chord DAVE DAC via dual BNC.
Until very recently, I was connecting my ROON Core to my cable modem/router using Google Mesh WiFi. I was and still is very happy with the sound quality. My audio system is too far from my cable modem to run an ethernet cable from cable modem/router to it. So, I relied on Google Mesh WiFi with a seperate pod situated close to the ROON Core and connected via ethernet. The Google Mesh pod itself had a linear power supply instead of the stock wall wart.
But I just tried a Powerline Ethernet adapter. This uses the home’s internal power cables to route ethernet from one room to another. I always thought that running digital data on power cables was going to be noisy. I bought a NetGear Powerline 1200 (1200Mbps speed). There are more expensive and newer powerline ethernet models available up to 2000Mbps speed. But these come with dual ethernet ports and pass through filtered power outlets. I though for dedicated audio purposes, better to keep it simple and minimize electronics.
Bottom line, I was blown away by the improvement in audio quality of the NetGear Powerline Ethernet connection over the Google Mesh WiFi connection. Mind you, I was very happy with the quality from the Google Mesh kit but the NetGear Powerline ethernet kit was clearly better.
The sound quality improvement was immediate and very evident. More space between instruments and notes. Smoother, more image depth and more air around the notes especially the trailing edges. So, no doubt, the Netgear Powerline 1200 was far superior to the Google Mesh WiFi. I then swapped the Netgear for a similar powerline ethernet product TP-Link AV600. This was recommended by Small Green Computer. The TP-Link is smaller and has 2 pin power prongs. The Netgear Powerlines has 3 pin power prongs, so it has a ground connection to the power outlet. I found the TP-Link to take a step backward in sound quality. The image depth decreased. Soundstage was flatter and there is less air and space between notes and instruments. The TP-Link Av600 was sounding a lot closer to the Google Mesh WiFi. Just my observations, FWIW.
ddriveman

mahler123

An electrician that we had engaged to fix something else did a measurement and told me there was a big voltage drop between the outlets on different floors and that after a brief power outage that caused the PLAs short out.

A voltage drop or outage by themselves cannot cause a short circuit.

Not for me. No wifi or powerline.

https://www.truecable.com/blogs/cable-academy/powerline-ethernet-adapters-vs-ethernet#:~:text=A%20Powerline%20adapter%20is%20a,condition%20of%20your%20electrical%20wiring.

I believe the adapters I use are these

https://www.gocoax.com/product-page/ma2500d

Inexpensive and they work fantastically, seem to be just plug and play. This assumes your home is already wired with coaxial cable from a cable TV or maybe Dish Network DirectTV type of installation. If so it might be an easier way to get ethernet level performance without running actual ethernet cable.