Cary 306/200 service?

Thanks, George - looks like I'm not the only one looking for that! Gone last night only a couple hours after your post! Anyway, I'm not so keen on doing that detailed of work, but maybe I could find someone around here that would - it's a great transport and player. The transport has seen very little use over the last few years since it's been primarily functioning as a dac in my system - maybe the cleaning and grease will work some magic. It now seems to reverse course from closing only when it's cold and functions ok when warmed up for an hour or two - sort of tired acting still, but not needing the little nudge of help to finish closing. 

I just got an AMR DP777SE and it's a pretty great sounding DAC! A friend is interested in the Cary - I only have one system....hard to part with the old friend, though

budburma OP
Nothing looked broken...

..

Get yourself some insurance with those gears/belt they are getting old and it won’t be long. Belt and gear set.
https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=%22VAM1202+gea...

Cheers George

Thanks, guys. I opened it up and removed the copper shield to clean the rails and gears I could get to. Pretty tight quarters and wasn't comfortable taking it any more apart. Lowe's had some silica grease without petroleum products that was applied to the rails and the top of the spindles I could see. Nothing looked broken.....It seems mildly improved and actually works fine now if properly warmed up. If the top's off or it's cold, the drawer still reverses course on trying to close, though it closes with a little help in that case. It still opens and closes more slowly that it did in the past, but more smoothly with the grease I applied. . When warmed up, it closes pretty much every time. So, good for now I guess - If I were more comfortable taking it apart further, more and better applied grease would likely help. Still sounds awesome as both a player and a dac.

The ’pure silicone’ spray I got is petroleum based with hexanes and ketones - should evaporate

It’s these things that make plastic dry out and become powdery and brittle and gears and things break when that happens, especially on old units like this gem, just go to your local auto shop and get the Caster bean oil rubber grease, especially on a nice R2R ladder unit like the Cary 306/200

Cheers George

I've used diver's silicone for O-rings on scuba regulators on my 303/300 unit.  BTW, I've had to change my laser drive 3 times in 15 yrs.  Good luck - that's a great sounding unit - I had one years ago.

Well, I got it open and the copper shield off. I cleaned the tracks off with isopropyl on a q-tip and it helped some. I'm looking into getting to the gears and will clean them, too. The 'pure silicone' spray I got is petroleum based with hexanes and ketones - should evaporate, but who knows how heavy 'aliphatic hydrocarbons'...as many carbons long as you like and greasy to boot. Maybe volatile, maybe not....Nice call on the rubber grease!

Clean it, (Q-tips and alcohol) and try a little light lube, first..

Clean all tray sliders and plastic gears that move it with Q-tips and metho.But DON"T use any petroleum based lube on them, as this will cause them to deteriorate. I found the small tube of PBR rubber grease to be the best, which is made from castor bean oil.https://www.autobarn.com.au/pbr-rubber-grease-17-5ml-tube-rg17

Also many silicone’s have petroleum in them

Is silicone spray petroleum based?
Avoid the spray can silicone lubricant varieties. The spray can will have petroleum based propellant and solvent to make it a spray. It will only be 5% (or so) silicone. Once the spray evaporates the silicone will remain.

Cheers George

Isopropyl Alcohol, strong rubbing alcohol. 

Liquid wrench silicone spray with a 1/32" 4" spray tube.
A handful of lint less wipes for overspray and cleaning.

Regards

Sounds great. I'll open it up and see what I can do!

I had the same problem with an Esoteric player. I lubed the transport tray with some Teflon lube in it. Still work well to this day.

Regards,
Dan

Thanks for the response.
I'll try that, then - although I'd rather have someone else do it as I'm clumsy and a little nervous about making things worse.
Clean with isopropyl?
What would be a good lube?

Clean it, (Q-tips and alcohol) and try a little light lube, first..

Strange that Cary doesn't service it.. they will sure take in ANY age amp and do an upgrade for you.. LOL Charge a pretty good sum too. They aren't cheap... 2-4 hours work and some parts. 1K-1500.00.

They don't do 2-500.00 jobs.. Mcintosh sure does.. Something to think about.. I own both Cary and Mac..  only Cary's tube power amps though.

Happy hunting..