can anyone recommend a person in LA area to pay to install a tricky Koetsu cartridge

I appreciate all the encouragement to do myself but am not inclined to do so with such a pricey cartridge.

https://www.youtube.com/watch?v=_VrFV5r8cs0

The one part of cartridge setup that really is tricky, at least in the sense of taking a good deal of time and skill to get it right, is VTA.

On the one hand VTA is the easiest of all. Is the cartridge body and/or arm pretty much parallel to the platter? Then you are done. 

But on the other hand very small, and I mean micro small, adjustments in VTA are pretty easy to hear. 

So what happens is, if your arm makes VTA easily adjustable, and if you try it and hear improvement, then you can spend as much time as you want getting it perfectly dialed in. Some even do this for each record. But if on the other hand your arm makes VTA adjustment a hassle, or you don't hear any difference, then don't worry be happy. 

Pretty much everything about turntables is like this by the way. Very fine adjustments in VTF, within the recommended range, make an audible difference. Every single aspect of cartridge setup is like this. Some guys throw their hands up and say here take my money you do it. Others roll up their sleeves and get the job done. The job by the way being endless- but you are the boss, you write your own checks, pay or don't pay the bonuses, and so of course its entirely up to you whether you fire the bum or give yourself a promotion.

millercarbon, CEO, President, and Chairman of the Board.
(Fired from more jobs than he can count!)

I'm with lewm, and will go even further, this is totally one you want to learn to DIY. I would even go so far as to say you never really know what it is to own and properly run a turntable until you do. Cuts right through so much of the mystery when you understand by doing. 

I installed my Koetsu Black Goldline, but I've done several and can tell you there is nothing special about any Koetsu, at least not when it comes to alignment. They are all the same.

Here's what you do. Order the Mobile Fidelity Geo-Disk. https://www.amazon.com/Mobile-Fidelity-Sound-Labs-Geo-Disc/dp/B003WXLG2I There's lots of others, there's even free ones you can download and print. This one has a bunch of features that make it worth the $50 over the freebies. 

Order a stylus force gauge if you don't already have one. Tweezers. Tiny little screwdriver. Scotch tape. Q-tips. Rubber band. Koetsu don't come with much so make sure you have the right size screws and nuts on hand. Visit your local shop. Ask. DO NOT believe any of their BS about how you need anything else not on my list.

Now while you're waiting go watch those Fremer video's. Here's how to watch the videos. DO NOT watch them thinking "I must do exactly every single thing he says" because you do not. Fremer shows a lot of totally unnecessary stuff, because so many guys have bought this stuff and learned how to do all these unnecessary steps and are gonna be offended if Fremer says it was all a waste of time and money. Even though it was. But literally nobody ever spent a couple grand on doo-dads then turned around and said that was dumb they're just doo-dads. Literally never happened. (Listen close, he drops hints here and there that this is in fact the case!) 

Here's the tricks you really want to know. 

Do this on your well lit kitchen table. Give yourself the whole day for this. It will take like 30 minutes. But having the whole day eliminates all stress and makes you feel so smart to be done in less than full day!

Leave the stylus guard on while mounting.

Koetsu uses nuts. It will seem like you need 3 hands. Use the rubber band. Makes it so much easier!

Use Scotch tape to hold the platter and Geo-Disk steady.

You'll be lowering the stylus onto the target grid, raising, adjusting, lowering, repeatedly. A Q-tip laid crosswise will prevent damage in case you spaz out. Brilliant idea, and I thought of it, which even Fremer didn't, Ha! So draw your own conclusions! 

That's it. Koetsu makes it hard with the nuts and not labeling the pins. Oh well. Live and learn. We all do. Next time, Soundsmith. Meantime, no worries, you are in for some fabulous sound.