Bungee Cords

Essentialaudio - The copper foil I'm referring to is 1 inch by 1/2 inch. One per window. Non-conductive adhesive.

Understood, Geoff. Copper foil is good for shielding, and I suppose as long as it's completely adhered to the surface on which it is mounted such as a window, its acoustic effect should be small. But aluminum foil rattling in the breeze is quite another thing. We're still laughing about it. You would, too.

Essentialaudio, dunno about aluminum foil on the walls but I'm a huge fan of copper foils on windows.

:-)

Geoffkait: The guy isn't an engineer by any stretch, he's a salesman with an inflated opinion of himself. What's your reaction to the aluminum foil on the walls, used with his Martin Logan speakers?

The earth is suspended from the moon with bungee cords and just a little bit of duck tape.

Essentialaudio wrote,

"I know a guy who suspended his CD player on bungees from an aluminum ladder stretched across some crates several years ago. It didn't sound very good, sucking the life out of the music."

One expects that can easily happen when the person is all thumbs. Bungee cords are used in many Engineering grad schools as an inexpensive but effective solution. A Bungee system can achieve a very low resonant frequency. It helps considerably to know which bungee cords to select and how to implement them, naturally.

I know a guy who suspended his CD player on bungees from an aluminum ladder stretched across some crates several years ago. It didn't sound very good, sucking the life out of the music. Later on he scotch taped aluminum foil all over the walls, so that should tell you something, even though that's another story.

Ironically he jumped into the industry making racks and stands using stacked up blocks of Sorbothane inside the completely enclosed shelves that couldn't be opened without destroying them, compressed under the weight of the component, later with threaded bolts through the shelves to compress them and prevent the stacks of Sorbothane from buckling, which had caused some shelves to collapse (structural engineering 101) and outraged early customers. As he made the exterior cosmetics fancier and raised the prices through the proverbial roof to become some of the most expensive on the market, the performance improved some but was still fundamentally compromised, as Sorbothane is intended for use in impact absorption, not steady state vibration control and isolation, not to mention the constraints on movement of the platforms mostly to the vertical direction.

Don't do it. You probably won't like it.

Bundee cord cound deaden sound of box speaker

Ho Ho its a joke right!!

Its could deaden the box in a bad way

Rodman99999-
I agree with your comments. Recently I used blue tak to couple my speakers to the stands to keep them, safe from falling over. I immediately noticed better sound-tighter bass and more detail. Very effective.

If you move your speakers up to the attic, you might need parachutes.

Actually I Am using the flat bungees on my A spkrs. I have normal ones on my B.

BTW-- As noted above, I not only have my speakers bungeed( to the floor--and stands--) but all my components if only for EQ purposes.

Any method of securing your speakers to their stands will result in an improvement(ie: focus, tightening of image, etc). Suspending them, in any manner, will have the opposite effect, allowing the speaker cabinet to react in response to the movement of the system's cones(simple physics).

This is too funny. I thought I was the only loon (or at least
my wife thinks I am). I came across an ad here on A'gon for a
device that basically "clamps" your equipment to
some sort of base or plinth. Sort of like a big wood clamp.
In the category of vibration control, I guess. It got me to
thinking about use of a bungee cord to do the same. I ran a
bungee cord under the hardwood plinth my CDP sits on (the
plinth is on 4 anti-vibration pads so there is a gap
underneath it) and hooked the two ends of the cord over the
top of the CDP (have a rubber piece under the hooks to keep
them off the top panel). Seemed to clean up sound a bit...at
the very least - it did no harm and cost me virtually
nothing. Have floor standers so not needing to anchor them.
Glad to hear someone else thinks they help with coupling
(which is what I assume is going on with your speakers too).

I thought for a second you were going to say you suspended the speakers on Bungee Cords. Now that would be good for sound reasons.

Under the theory that if it cost more it must sound better I'd recommend an upgrade to Rok Straps.

They are a great product, I use them for motorcycle touring and they have the advantage of being flat so that they don't roll like round bungees.