2. tech-talk
  3. 167443-162637

behringer DEQ2496

Hi,
I am a very beginner but had a chance to own a pro device since it was second-hand and cheap :)
all I need is to connect my microphone into the DEQ, use the limiter, equalizer while I am making the voice-over, then get the corrected voice into my audio interface (Zoom H6)
Is it possible at all?
I tried some of the obvious solutions but none of them being successful.
I can connect my mic into the left or right inputs and connect the left or right output into my Zoom H6. in this situation I get a clear voice into my zoom when I bypass my DEQ!!! any attempt to get a signal without bypassing, was failing
what am I missing?
Thank you in advance and very sorry for my basic question
ashk1860
9 responses Add your response
rodman99999
6,123 posts
 
@ashk1860-   "As I understand that is just used for measurement."

                                        Which is why I asked!

                     I’ve seen much sillier mistakes made, in the field.

Either of those mics should work, with a mic preamp (you're correct), into the 24/96 (R IN/L IN).

                  From there: use the I/O menu to select your signal path.                  

                                      Go make some music.
ashk1860 OP
3 posts
 
Hi
no I don’t. As I understand that is just used for measurement. I tried several mics mainly mv7, oktava mk012,…. I think I need to use preamps. I am borrowing one to test :)
thanks
rodman99999
6,123 posts
 
@ashk1860: What other microphone are are you trying to use, beside the wireless?

Just a thought: if that other mic requires phantom power (ie: an upper-crust condenser mic); that option must be chosen, for it to work. (MIC LEVEL +15V)

You’re not trying to use the RTA/MIC IN, for any of this, are you?
Post removed 
ashk1860 OP
3 posts
 
Fuzztone, actually I did. I could make it to work connecting my Sennheiser ew300 wireless mic into it and it worked exactly as I want :) but I could not make it to work with mic as input yet.. 
ashk1860 OP
3 posts
 
Hi Artemus
thank you for your suggestion. 
I post a question in pro audio board now :)

fuzztone's avatar
fuzztone
5,582 posts
 
 Keep trying instead of wasting time asking us.
artemus_5's avatar
artemus_5
1,925 posts
 
You might have better luck on a pro audio site where they are more familiar with the products. Being a musician I have some understanding but not really familiar with the equipment. IOW, I’ve never owned it. However many pro pieces are specialized for use with a PA system with audio board. I think this is the case with the Berringer. I almost owned a Zoom once so I understand that it has limitations too which causes me to question IF it would work...at least with these 2 pieces alone.  But again, check the pro audio boards. Best to you
Post removed 
Log in to respond
More to discover
80x80
Harbeth Super HL5 Plus 40th Anniversary
80x80
Ayon Audio S-10 II Signature Network Player DAC Preamp
AWARD WINNING - REMARKABLE!
80x80
Antipodes Audio DX V3 / 6tb SS