Aurender A10 help

I suggest you connect your A10 to your Luxman amp and power down and restart your A10. Please check all settings on the Conductor App to ensure they are correct.

please double check the cables from your A10 to the Luxman to confirm the right outputs and inputs. Also, check the input mode on your amp. If still no sound, please call The Music Room. Please keep us posted.

Please also check your volume control on the A10.  The Manual says:

"7. Volume Knob

Manually adjust the DAC-level volume control. A10 Volume control can be configured or disabled in the Advanced 2 section of the Settings Menu in the Conductor app".   It is possible your volume control is not set correctly.

I am not familiar with the Aurender A10 so please double check ALL switches and settings to ensure they are set correctly.   Please keep us posted.  

Please send Aurender a remote support request from your Conductor App:

“In many cases, if your Aurender is having problems, Aurender can diagnose and fix any issues via our Remote Support service.

To send a Remote Support request email, open the Conductor app and go to Settings>Help>Send Remote Support email. It will ask you to enable location services, which is normal”.

I suggest you still call The Music Room on Monday Is your Aurender A10 brand new or preowned?

I also do not understand the no connected device message. Please reboot your Aurender A10 again. Please keep us posted. 

I found this in the A10 manual:

“If the Aurender is being used with a preamp or integrated amp that has volume control, it is recommended to turn "Use Direct Output" ON so that Aurender's DAC-level volume control is disabled. In this case the preamp or integrated amp will do its job as the volume controller without confusion from multiple levels of volume control”. 

I give up. I have no clue why you are not getting sound. Please contact The Music Room and I also suggest an Aurender Remote Support request. Thanks.