Audio Technica AT33EV different versions? On RP6?
If you could spend a little more, I've had this model and loved it: http://www.audiocubes2.com/product_info.php/cPath/31/products_id/605 I think it's worth the extra dollars over the regular version. |
Sbrown; if you order the cartridge, be aware... I have been using an AT33PTG for years and really enjoy the cartridge, but you need to be aware that you're purchasing a product not authorized for sale in the U.S.A.; it has no warranty either here or in Japan. That's usually not a problem (other than the legalities of grey market goods), unless the supplier decides that they won't replace or refund a defective cartridge. Now you're stuck. No warranty, no manufacturer assistance. I received a defective AT33PTG (stylus was mis-mounted) and it took 80 days of email exchanges with the supplier before I got a replacement. The chances of having any problems are slim, but just be aware that if something does go awry you don't have much recourse. Regards, Tom |
If you check with the Amazon listings for the AT33EV, you'll find that they are for the most part Japanese vendors. Now, before you pay an extra $200 to get the AT33PTG from Audiocubes2, check Amazon again, and you'll see that the Japanese vendor partners on Amazon go as low as $518 for the AT33PTG/II. While Audiocubes2 has good customer service according to customer feedback , so does Amazon, and you can save nearly $200 besides. Also, before buying from a Japanese vendor, always check with LPgear.com first. If they can stock it, there's a good chance they have a better price. |
05-26-13: SbrownnwAre you talking about the AT33EV or AT33PTG? Right now 2juki has the AT33EV but not the PTG. I think it's worth going for the PTG to move up from an elliptical stylus to a MicroLine. The MicroLine is particularly desirable on a MC cart because--according to my local turntable specialty dealer--that stylus shape lasts a lot longer than other stylus shapes. I have around 3000 hours on my original AT150MLX MicroLine stylus with no hint of wear, distortion, or mistracking. There are several Japanese vendors on Amazon with high satisfaction ratings. |
Sbrownnw, When you get the AT33PTGII and have it up and running, please post your thoughts on it, and what arm and phono stage you are using with it. I'm somewhat interested in this cartridge too, and also in how your transaction with 2juki went. I was almost ready to order a Nagaoki MP-500 from Japan when I saw this thread, so I'll hold off for now to see what your thoughts are. Thanks. |
Audio technica products are the only cartridges I use. Surprisingly, I find their budget MM ones are just as good as the mid priced ones. Try their 30 to 50 dollar line. I have found that their musicality trumps the other more expensive ones. I have a vintage Dual and my system just rocks. PS: their headphones are also a steal. |
Hi, Since a lot of AT33EV users/past owners here? Maybe thoughts on actual compliance (for use with Clearaudio Satisfy arm): - Static compliance: 40×10 - 6 cm/dyne - Dynamic compliance : 10×10 - 6 cm/dyne (100Hz) Weight: 6.9 g So maybe it is really 15-20 cu... Maybe end up with 8.5-10hz RF based on based on actually compliance and extra weight? |
