2. tech-talk
  3. 1236116280

Audio Noise from my step up/down transformer

I just bought a 220V Pathos TT integrated amplifier and it came with a PowerBright Step up & Step down Transformer for use here in the USA.
I am hearing noise coming through the speakers that I think is coming from the step up transformer.
When putting my ear next to the transformer there is a noticable low hum and when listening to the noise in the speakers it has the same pitch as the transformer but is several octaves higher.
The noise is present in the speakers whether the volume is up or down although the noise gets noticably louder when turning the volume all the way up

Any thoughts?

Thank you
jetrexpro
6 responses Add your response
mapman's avatar
mapman
22,197 posts
 
DO you hear it the same with any source switched to on the integrated, for example phono (if present) versus aux or CD?

See if physically moving the transformer further or closer to the integrated causes a change in the noise level at a particular volume.

If so, relocating it further away from the integrated might help.

If moving it further away seems to help but you can't move it far enough away, consider options to add some additional magnetic shielding around the transformer for better isolation.
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
You probably have a power imbalance and you are using too small of a transformer for the task. This causes transformer core saturation on either the positive or the negative AC cycles... leading to harmonic distortion and a DC offset that induces noisy ground loops which are easily picked up on RCA interconnects.

Your amp uses something like 240 Watts when run at 220 volts suggesting it will need around 500 watts at 110... so I would use at least a 1000 watt transformer to be on the safe side.
Post removed 
ngjockey
1,042 posts
 
The hum from the transformer is mechanical and not necessarily translated directly to the quality of the AC to the amp. That mechanical hum could be a symptom of saturation caused by overloading or DC offset but some just do that in some places. In other words: Don't shoot the translator. At least, not before questioning the usual suspects.
kijanki's avatar
kijanki
4,428 posts
 
Saturation also happens when voltage is too high. It is not only mechanical hum but also sinewave distortion.
jetrexpro OP
506 posts
 
Thanks Guys!

It turned out not to be the step up transformer. The noise came from some circut boards inside the amplifier itself. When I reported it to Pathos, they sent me new boards, and I put them in and the noise is gone!!
Log in to respond
More to discover
80x80
Aurender N100H
FREE SHIPPING!
80x80
Ayon Audio S-10 II Signature Network Player DAC Preamp
AWARD WINNING - REMARKABLE!
80x80
RSX MUSIC SERVER RSX MUSIC SERVER