Anyone do DVD player modifications?

Check these people: www.lcaudio.com

Have a Pioneer Elite DVD 5 moded by Dan W and am extremely happy with it.right

About ten years ago, I had Stan Warren perform two upgrades, one on my former Adcom GFA-555 amplifier and another on my JVC Z1050 CD player. At a cost of only about $300 for each modification, both components came back sounding as if they cost twice as much as I originally paid for the units. I'm not certain if this is still Stan's address and telephone number, but here's what I have on hand.

Supermods (Stan Warren)
2375 W. 21st Ave.
Eugene, Or. 97405
1-503-344-3696

Dan and Stan are both very well regarded with both DACs and DVD Players. I believe you could not go wrong with either. Their mods are similar, but not the same. On the Pioneer DVD players Stan completely removes the output stage and replaces it with a buffer of his own design. "Less is more" I believe. It will reduce the output of the player (you will have to turn the volume up more). On the MSB Link DACs Stan will cut a 3X3 inch square hole on the bottom of the case. He believes it helps with the resonance or something of the case? You would have to ask him. Stan will also Mod an cheap Aiwa CD Changer with a special digital cable to go with the Link DAC. See ChicagoAudio.org about that mod.

Would you consider both to be quality modifers, or do they specialize on different gear e.g., Dan on dvds and Stan on DACs?

Again, thanks for catch my blunder.

Doug

Modwright is NOT Stan Warren. It is Dan Wright. They are both in Oregon.

Stan has a website where you can check out what he does and how much he charges.

http://www.modwright.com/index.html

Search the other threads for Stan's phone number in Oregon. He only does this by phone.

How can I reach Stan Warren?

Stan does more than just upgrade capacitors, etc. On the Pioneers he completely removes the existing output stage and replaces it with his own setup.

My Stan Warren modified Pioneeer sound great considering how little I spent.

Upgrading the power supply section on a DVD player will increase the performance of both sections ( audio and video ). As usual, the "usual" culprits that you'll find recommended are Stan Warren, Ric from EVS, Dan Wright, John Hillig, etc... They are basically upgrading capacitors to models with a lower ESR / possibly higher amounts of reserve, "fine tuning" the sonics of the audio path via parts swapping ( resistors, caps, wiring, etc ) and sometimes removing unnecessary filtering / components. This typically results in increased liquidity, smoothness detail and "musicality". As to the video improvements, you should see more contrast and lower noise on the screen from the increased power supply capacity. Sean
>

Check out www.Modwright.com

Search for Stan Warren in this forum. Good luck.