I would be interesting if someone bought a new pair of monoblock amps and burned in one amp and then compared the two. I bet the sound difference would be very audible between the two amps.
Amplifier Break-in - It's Real
I just completed a major amplifier upgrade from using the power amp side of a NAD 375BEE integrated to a Coda No. 8 and can swear to reality of a necessary amplifier break-in period and the need for a great degree of patience. For the record the 375BEE is a great integrated and the power amplifier side is very good. I replaced the preamp some time ago with a Freya+, a significant upgrade. Regardless, the 375BEE has some limitations and I "needed" an upgrade. I have severe space restrictions for my gear/rack, so size mattered, and final candidates were Bryston and a latecomer in the Coda 8. The Coda had such great reviews/comments I went with it.
Days 1, 2 and 3 were pretty frustrating and I was concerned. My NAD setup had a very good sound stage and rich bass, neither of these were evident early on with the Coda. I thought it might be an impedance mismatch with the Freya (75 SE or 600 balanced ohm output) and the Coda. Some online specs show the Coda at a very low 1K Ohm input impedance, however before I bought I checked with Coda and they confirmed it is actually 10K ohms. Still I swapped out the new balanced cables for RCA's, no significant change. For the first few days I was turning on the amp in the morning and running it all day, but off at night. I decided to have patience, accept the need for break-in, and just start running 24/7. Lo and behold about three days into that process, during which I found some new respect for electronica, the sound stage and bass started to appear and have only improved. It was uncanny. IMHO there was no way I was imagining this change because contrast was so great from the NAD when I first plugged the Coda into the system. I know my system well and changed nothing else, aside from the noted interconnects, from one amp to the other. I realize I am mostly preaching to the choir, but am writing for the next person that plugs a new amp in and does not hear what they expect right away.
In case it matters, the rest of the system is KEF LS50, Gumby DAC, REL 7i sub and Pi 4 with Allo DigiOne running Moode.
Days 1, 2 and 3 were pretty frustrating and I was concerned. My NAD setup had a very good sound stage and rich bass, neither of these were evident early on with the Coda. I thought it might be an impedance mismatch with the Freya (75 SE or 600 balanced ohm output) and the Coda. Some online specs show the Coda at a very low 1K Ohm input impedance, however before I bought I checked with Coda and they confirmed it is actually 10K ohms. Still I swapped out the new balanced cables for RCA's, no significant change. For the first few days I was turning on the amp in the morning and running it all day, but off at night. I decided to have patience, accept the need for break-in, and just start running 24/7. Lo and behold about three days into that process, during which I found some new respect for electronica, the sound stage and bass started to appear and have only improved. It was uncanny. IMHO there was no way I was imagining this change because contrast was so great from the NAD when I first plugged the Coda into the system. I know my system well and changed nothing else, aside from the noted interconnects, from one amp to the other. I realize I am mostly preaching to the choir, but am writing for the next person that plugs a new amp in and does not hear what they expect right away.
In case it matters, the rest of the system is KEF LS50, Gumby DAC, REL 7i sub and Pi 4 with Allo DigiOne running Moode.