2. misc-audio
  3. 191470-38239

Amp Stands - Wood or Stone

I'm in the process of relocating my audio equipment to a side wall and need to place my amps, AGD Audions, on something.  Floor is carpeted.  Stands will be very small and won't be supporting much weight.  I have access to granite, marble, etc. (next to nothing scape from remodel jobs).  Also, have pretty good relationship with a serious wood worker who is happy to cut maple, oak, cherry, most any hardwood, etc.  Cost is not really an issue just looking for an opinion / logic around which material I should use.  At this point, I'm thinking 1 1/2 to 2 inch thick walnut on some kind of cone / spike legs. Sorry for maybe a dumb question!

testrun
bigshutterbug
381 posts
 

From personal experience, I have tried both granite and different types of wood. Under front end components and amps. I found the granite gave me a more "forward" or up-front presentation, sometimes "edgy". Not the case with wood.

artemus_5's avatar
artemus_5
1,927 posts
 

I've done a good bit of footer experiments. my findings are that very hard surface, IE glass, stone, marble, etc tend to emphasize the high frequencies. So I would stay away from those unless you need more high frequencies. But it can also sound bright which is why I would stay away from hard surface like stone. Wood has a much better balance , especially tone woods like maple which is what I would use

czarivey
5,946 posts
 

bamboo cutting board works great as stand. You can get it in Ikea for $20. It will look nearly as if it would be MapleShade brand.

More to discover